9051 SILVER Pro Power

9051 G.P. Duct tape Tape Structure Backing PE LAMINATED SYNTHETIC CLOTH Adhesive SYNTHETIC RUBBER / 9051 RESINS CLEAR ADHESIVE Characteristic Thinner version of 9061, its a strong and durable tape suitable for all purposes, uses and surfaces, ideal for daily urgent repairs. CHARACTERISTICS UNITS STD. TEST TOLER. METHOD VALUES Total Weight ISO 536 g/m2 110 10% Total Thickness m 140 AFERA 5006 10% MD tensile strength N/cm > 28 AFERA 5004 MD elongation at break % > 10 AFERA 5004 Adhesion to steel plate N/cm > 5,5 AFERA 5001 Rolling ball tack PSTC 6 <0,5 Available colours: SILVER - BLACK - WHITE - RED - ORANGE - YELLOW - DARK BROWN- GREEN - BLUE- DARK OLIVE GREEN Figures shown refer to average values only, based on tests carried out in conditioned laboratory and are not valid for specification. The company reserves the right to modify or change the products at any time without notice. All information has to be intended as generic advise for the use of products. Users have to verify the suitability of each tape in actual application under specific conditions. DATE OF ISSUE: 07/01/15 REV 03 140515 TECHNICAL DATA SHEET 9051 G.P. Duct tape Application fields Technical Features Terms & Conditions of liability PPM tapes must be stored in a dry location, protected from direct sunlight exposure and from freezing. Storage temperatures should be as close as possible to room temperature suggested storage temperature should range from 15 to 25C with max. relative humidity of 60%. Make sure the surface you wish to place the tape on is cleaned, dried and free from oil and dust. It is suggested not to apply the tape with temperatures lower than 10C. With a storage temperature lower than 10C, it is always suggested temperature reconditioning of the tape at room temperature ( 15C - 25 C ) before its use. Shelf life from date of manufacture: (no yellowing and < 10% loss in performance at 23 C, 50 % humidity) is considered 12 months for Slit rolls and 6 for Jumbo rolls. PPM does not take responsibility for the defective material is not stored and used in accordance with the conditions listed above. www.ppmindustries.com REV 03 140515 TECHNICAL DATA SHEET