High Temperature Cross-Linked Fluoroelastomer Heat Shrink Tubing Features: 2:1 shrink ratio. Superior resistance to highly corrosive chemicals, fuels, lubricants, acids and solvents. Outstanding, high temperature performance. Highly impact, abrasion and cut-through resistant. Very flexible. Easily marked. Meets Military specifications. Uses Protection of wiring and component covers in aircraft and aerospace applications. Automotive applications. Hydraulic fluid transport mechanisms. Chemical processing applications. Applications up to 200C. Specifications AMS-DTL-23053/13. MIL-R-46846,Type III, Class 1. Technical Data Shrink ratio : 2:1. Minimum recommended shrink temperature : 175C (347F). Operating temperature range : -55C to 200C. Longitudinal shrinkage : +1/-10%. Physical / Electrical / Chemical Properties: Specific gravity : 1.7. Ultimate elongation : 450%. Low temperature flexibility : 4 hours at -55C no cracking. Flammability : Self-extinguishing. 12 Volume resistivity : 10 ohm-cm. Dielectric strength : 500vpm. Corrosion resistance : Non-corrosive. Fuel, Oil, Solvent, Acids and Alkalis resistance : Excellent. High Temperature Cross-Linked Fluoroelastomer Heat Shrink Tubing Specification Table Inside Diameter Inches Recovered Nom. Part Number (mm) Size Standard Wall Thickness (Inches) Colour Inches Supplied Recovered Package of Five 6 Package of Five 48 (mm) (Minimum) (Maximum) inches Lengths inches Lengths 1/8 Black 0.125 (3.18) 0.062 (1.57) 0.03 (0.76) MC36404 MC36405 3/16 Black 0.187 (4.75) 0.093 (2.36) 0.035 (0.89) MC36406 MC36407 1/4 Black 0.25 (6.35) 0.125 (3.18) 0.035 (0.89) MC36408 MC36409 3/8 Black 0.375 (9.53) 0.187 (4.75) 0.035 (0.89) MC36410 MC36411 1/2 Black 0.5 (12.70) 0.25 (6.35) 0.035 (0.89) MC36412 MC36413 5/8 Black 0.625 (15.88) 0.312 (7.92) 0.042 (1.0668) MC36414 MC36415 3/4 Black 0.75 (19.05) 0.375 (9.53) 0.042 (1.0668) MC36416 MC36417 1 Black 1 (25.40) 0.5 (12.70) 0.049 (1.2446) MC36418 MC36419 Dimensions: Inches (mm) Disclaimer This data sheet and its contents (theInformatio) belong to the Premier Farnell Group (theGrou) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group s liability for death or personal injury resulting from its negligence. SPC pro-Power is the registered trademark of the Group. Premier Farnell plc 2011.