Heavy Wall Tubing Adhesive-Lined, Flame-Retardant, Polyolefin, Heat Shrink Application Rugged, heavy wall tubing is specially designed for insulating, protecting and sealing electrical connections and joints in low-voltage cables where flame-retardant, electrical insulation and waterproof are required. Specifications Operating Temperature : -45C to +125C Fully Shrink Temperature : 125C Shrink Ratio : 3:1 Colour : Black Resistant to UV Technical Data Property Test Method Typical Data Tensile Strength ASTM D2671 14 MPa Elongation ASTM D2671 400% 3 Density ASTM D792 1.2g/cm Longitudinal Change UL 224 10% Elongation after Aging UL224 158C 168hrs 300% Heat Shock UL224 225C 4hrs No cracking Dielectric Strength IEC 243 20kV/mm 14 Volume Resistivity IEC 93 110 cm Water absorption (%) ASTM-D570 0.5 Flammability VW-1 Self-extinguish in 30 seconds Hot Melting Adhesive Property Property Test Method Typical Data Water Absorption ASTM D570 0.2% Softening Point ASTM E28 95C Peel Strength (PE) ASTM D1000 120N/25mm Peel Strength (AL) ASTM D1000 80N/25mm Product Dimensions Size As Supplied After Recovery Internal Part Number Internal Out layer Wall Adhesive Layer Total Wall mm Diameter Diameter Thickness Wall Thickness Thickness (mm) PP001869 9/3 9 3 2.03 0.3 0.48 0.2 2.5 0.4 PP001870 13/4 13 4 2.33 0.4 0.48 0.2 2.78 0.5 PP001871 20/6 20 6 2.33 0.4 0.63 0.2 2.95 0.5 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 23/03/18 V1.0Heavy Wall Tubing Adhesive-Lined, Flame-Retardant, Polyolefin, Heat Shrink Size As Supplied After Recovery Internal Part Number Internal Out layer Wall Adhesive Layer Total Wall mm Diameter Diameter Thickness Wall Thickness Thickness (mm) PP001872 28/9 28 9 2.33 0.4 0.73 0.2 3.05 0.5 PP001873 38.1/12 38.1 12 3.13 0.5 0.73 0.4 3.55 0.5 PP001874 51/16 51 16 3.85 0.5 0.73 0.4 4.58 0.7 PP001875 70/21 70 21 3.65 0.5 - - Part Number Table Description Part Number Tubing, Heat Shrink, Heavy Wall, W/ Adhesive, 3:1, 9mm, Black, 1.22m PP001869 Tubing, Heat Shrink, Heavy Wall, W/ Adhesive, 3:1, 13mm, Black, 1.22m PP001870 Tubing, Heat Shrink, Heavy Wall, W/ Adhesive, 3:1, 20mm, Black, 1.22m PP001871 Tubing, Heat Shrink, Heavy Wall, W/ Adhesive, 3:1, 28mm, Black, 1.22m PP001872 Tubing, Heat Shrink, Heavy Wall, W/ Adhesive, 3:1, 38.1mm, Black, 1.22m PP001873 Tubing, Heat Shrink, Heavy Wall, W/ Adhesive, 3:1, 51mm, Black, 1.22m PP001874 Tubing, Heat Shrink, Heavy Wall, W/ Adhesive, 3:1, 70mm, Black, 1.22m PP001875 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 23/03/18 V1.0