End Caps Heat Shrinkable, Adhesive-Lined Description This offers an economical means of sealing the ends of power and control cables to ensure a watertight seal. The internal surface of the end caps is coated with hot melt adhesive, which retains its flexible properties after recovery . Protects against oxidation, ozone, UV radiation, etc. Specifications Operating temperature : -45C to +105C Minimum shrink temperature : 90C Full Recovery Temperature : 130C Voltage Rating : 1kV Colour : Black Easy to fit on cable end and ensures seal Technical Data Property Test Method Typical Data Operation Temperature IEC 216 -45C to +105C Tensile Strength ASTM-D-2671 12MPa Elongation at Break ASTM-D-2671 300% Tensile Strength after Aging ASTM-D-2671 10MPa (130C,168hrs) Elongation at Break after Aging ASTM-D-2671 230% (130C,168hrs) Dielectric Strength IEC 60243 15kV/mm Stress Cracking Resistance ASTM-D-1693 No cracking 11 Volume Resistivity IEC 60093 110 cm Fungus and Decay Resistance ISO 846 Pass Longitudinal Shrinkage ASTM-D-2671 10% Eccentricity ASTM-D-2671 35% Water Absorption ISO 62 0.5% www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 02/04/18 V1.0End Caps Heat Shrinkable, Adhesive-Lined Inner Diameter Wall Thickness (mm) (mm) Part Length Size Number (mm) After After recovery As supplied Recovery ( 10%) PP001916 11 11 5 30 5 1.8 0.1 PP001917 16 16 8.5 70 5 2.5 0.1 PP001918 20 20 8.5 70 5 2.5 0.1 PP001919 25 25 11 80 5 2.5 0.1 PP001920 30 30 17 90 5 2.6 0.1 PP001921 35 35 17 90 5 2.6 0.1 PP001922 40 40 17 90 5 2.6 0.1 PP001923 55 55 25 125 5 2.5 0.1 PP001924 75 74 31 145 5 3.2 0.1 PP001925 100 100 40 140 5 5 0.1 PP001926 120 120 55 150 5 4.4 0.1 PP001927 140 140 61 180 5 4 0.1 PP001928 250 248 94 270 5 4 0.1 Part Number Table Description Part Number Heat Shrink End Cap, Adhesive-Lined, 11mm, Black PP001916 Heat Shrink End Cap, Adhesive-Lined, 16mm, Black PP001917 Heat Shrink End Cap, Adhesive-Lined, 20mm, Black PP001918 Heat Shrink End Cap, Adhesive-Lined, 25mm, Black PP001919 Heat Shrink End Cap, Adhesive-Lined, 30mm, Black PP001920 Heat Shrink End Cap, Adhesive-Lined, 35mm, Black PP001921 Heat Shrink End Cap, Adhesive-Lined, 40mm, Black PP001922 Heat Shrink End Cap, Adhesive-Lined, 55mm, Black PP001923 Heat Shrink End Cap, Adhesive-Lined, 75mm, Black PP001924 Heat Shrink End Cap, Adhesive-Lined, 100mm, Black PP001925 Heat Shrink End Cap, Adhesive-Lined, 120mm, Black PP001926 Heat Shrink End Cap, Adhesive-Lined, 140mm, Black PP001927 Heat Shrink End Cap, Adhesive-Lined, 250mm, Black PP001928 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 02/04/18 V1.0