Solderable Enamelled Copper Wire 38SWG, 0.15mm Features: Solderable Enamelled Copper Wire*** Coated in self-fluxing polyurethane, conforming to BS4520 Grade 2** (now incorporated within BS6811 Section 1, Pt3) Suitable for prototype wiring, PCB track repairs, shorting links and coil forming Colour-coded to aid identification Colours - Copper-gold, green and pink* The wire requires a soldering iron temperature of 400C+ to remove the enamel. (Weller bit temperature code 8 or 9 or temperature-controlled iron) Specifications: Standard Wire Gauge : 38 SWG Wire Diameter : 0.15mm Insulation Thickness : 0.012mm Coating : Grade 2** Resistance : 0.967/m typical Current Rating : 82MA Insulation Breakdown : 1,500Vrms Max. Continuous Temperature : +120C Soldering Temperature : +400C to +480C Reel Length (Approximately) : 38m Note *The colours can vary, therefore there may be a difference between one batch an another as supplied by our manufacturer. ** Due to occasional supply difficulties, the wire diameters may vary : 0.15mm may be offered as 0.16mm. Also, the grade may vary from Grade 2 to Grade 1. ***Caution : Emits toxic vapour when soldered. Ventilate area well. Part Number Table Description Colour Part Number Copper-Gold RRP-C-105 Wire, 0.15mm, PK of 4 Reels Green RRP-G-105 Pink RRP-P-105 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purpos es in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replac es all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 20/08/15 V1.0X-ON Electronics Authorized Distributor Click to view similar products for Pro Power manufacturer. Other Similar products are found below : PPCY4C075100M PPCY3C10050M PPC217 PP001328 PP001316 PP001109 PP001088 PP000940 PP030 PP000909 PP001326 PP001308 PP000877 PP000868 PP000704 PP001163 PP001156 PP001085 PP000510 PP001076 PP000944 PP000914 PP000407 PP000386 PP000870