SP95/5/BLACK Pro Power

Heat Shrink Specifications: Approval category : UL224 Standard : CSA, LR54949 Approval bodies : UL Shrink ratio : 2:1 Shrink temperature : 100C Minimum operating temperature : -55C Maximum operating temperature : 135C Specification Table Dielectric Fully External Reel Unshrunk Flammability Material Colour Strength Shrunk Length / Length Part Number Diameter Rating (kV/mm) Diameter Height (m) (m) 1.6 0.8 SP16/RL/BLACK 3.2 1.6 150 150 SP32/RL/BLACK 4.8 2.4 SP48/RL/BLACK Irradiated polyolefin 6.4 3.2 SP64/RL/BLACK 9.5 4.7 75 75 SP95/RL/BLACK 12.7 6.3 SP127/RL/BLACK 19 9.5 60 60 SP190/RL/BLACK 1.6 0.8 SP16/1.2/BLACK 2.4 1.2 SP24/1.2/BLACK Polyolefin Black 20 3.2 1.6 VW-1 SP32/1.2/BLACK 4.8 2.4 SP48/1.2BLACK 6.4 3.2 SP64/1.2BLACK 1.2 9.5 4.7 SP95/1.2/BLACK - 12.7 6.3 SP127/1.2/BLACK 19 9.5 SP190/1.2/BLACK Irradiated polyolefin 38.1 19 SP381/1.2/BLACK 50.8 25.4 SP508/1.2/BLACK 9.5 4.7 SP95/5/BLACK 5 12.7 6.3 SP127/5/BLACK Dimensions : Millimetres (Unless Specified) www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 19/12/11 V1.1Heat Shrink Specification Table Dielectric Fully External Reel Unshrunk Flammability Material Colour Strength Shrunk Length / Length Part Number Diameter Rating (kV/mm) Diameter Height (m) (m) Irradiated polyolefin Black 25.4 12.7 VW-1 5 SP254/5/BLACK Polyolefin 2.4 1.2 SP24/1.2/CLEAR Irradiated polyolefin 6.4 3.2 1.2 SP64/1.2/CLEAR - Polyolefin 19 9.5 SP190/1.2/CLEAR 6.4 3.2 SP64/5/CLEAR 5 38.1 19 SP381/5/CLEAR 2.4 1.2 SP24/RL/CLEAR Clear - 3.2 1.6 150 150 SP32/RL/CLEAR 4.8 2.4 SP48/RL/CLEAR Irradiated polyolefin 9.5 4.7 SP95/RL/CLEAR 75 75 12.7 6.3 SP127/RL/CLEAR 19 9.5 60 60 SP190/RL/CLEAR 20 38.1 19 30 30 SP381/RL/CLEAR 1.6 0.8 SP16/1.2/YELLOW 2.4 1.2 SP24/1.2/YELLOW 3.2 1.6 SP32/1.2/YELLOW Polyolefin 4.8 2.4 SP48/1.2/YELLOW 6.4 3.2 SP64/1.2/YELLOW 9.5 4.7 1.2 SP95/1.2/YELLOW Yellow VW-1 - 12.7 6.3 SP127/1.2/YELLOW Irradiated polyolefin 19 9.5 SP190/1.2/YELLOW 25.4 12.7 SP254/1.2/YELLOW 38.1 19 SP381/1.2/YELLOW Polyolefin 50.8 25.4 SP508/1.2/YELLOW Irradiated polyolefin 1.6 0.8 5 SP16/5/YELLOW Dimensions : Millimetres (Unless Specified) Important Notice : This data sheet and its contents (theInformatio) belong to the members of the Premier Farnell group of companies (theGrou) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group s liability for death or personal injury resulting from its negligence. Pro-POWER is the registered trademark of the Group. Premier Farnell plc 2011. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 19/12/11 V1.1