This completes the assembly steps of this stand. As noted earlier, it is the ultimate responsibility of the user to ensure safe and secure Model 50-14797 Installation of any television on this stand. There is no guarantee that every television, ASSEMBLY INSTRUCTIONS even if within the size and weight limits specified, will be secure in every situation. Once installation is complete, the user must make certain the television set is secure. Failure to do so could result in property damage, electrical or fire hazard and personal injury or death, should the television fall. Pro Signal, MCM Electronics and all retail dealers providing this product cannot be held liable for damages that result from improper or insecure installation. Things to remember: Furniture including tables, dressers, entertainment centers and shelves must be tested to ensure stability Televisions should be installed out of reach of small children or pets that could potentially pull or knock a set from its location Connecting cables, including power cords, cable, antenna or satellite TV wires, cables from other components, indoor antennas and similar items should be secured and tucked out of the way to prevent being snagged or tripped over Televisions should not be located in direct sunlight or in locations where they can come in contact with rain or moisture. In the event the user is not confident in the safety of this installation it is highly recommended that a qualified installation professional be contacted. Warranty This device is warranted against manufactures defects for a period of 1 year from the original date of purchase. This warranty covers all internal components and the cost of labor to either repair or replace C A U T I O N : DO NOT EXCEED RATED the unit. This warranty covers only the unit, and does not cover connected equipment, or any loss that LISTED WEIGHT CAPACITY. SERIOUS may occur, regardless of cause. It will be the sole discretion of MCM Electronics to determine the INJURY OR PROPERTY DAMAGE MAY OCCUR TV STANDS applicability of said warranty, and determination as to whether the unit will be repaired or replaced. Questions regarding application, use, or problems with this unit should be directed to MCM Electronics Tech Support, which can be found at www.mcmelectronics.com. 75x75/100x100 200x100/200x200 70 50kg 300x300/400x200 MAX (110lbs) 400x400/600x400 RATED www.mcmelectronics.com Model 50-14797 ISSUED: APR. 2014Identify and verify all of the included hardware B3 To begin, place the glass base (B1) on a flat surface with the shiny side facing upwards. It is best if this B4 is located on a table, where the mounting holes are able to hang just over the side. B5x2 Locate the following parts: Glass Base (B1) Two rear pedestals (B2) Metal top plate (B3) Rear bracket plate (B4) Two vertical bars (B5) B2x2 Six clear vinyl self adhesive feet Eight plastic washers (A2) 14 metal washers (A3) Six hex head screws (A4) B1 Four philips head screws (A5) Four wing nuts (A6) Allen wrench (A7) A1x6 A2x8 A3x14 A4x6 A5x4 A6x4 A7x1 3 2