PLCDA12C-6-LF-T7 ProTek Devices

PLCDA03C-6 - PLCDA15C-6 Only One Name Means ProTekTion 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The PLCDAxxC-6 Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and CMOS bus line applications against the damaging eects of Eff SD, tertiary lightning and switching transients. The PLCDAxxC-6 Series has a peak pulse power rating of 500 Watts for an 8/20s waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-8 PACkAGE APPLICATIONS FEATURES Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Computer Interface Protection Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns Ethernet - 10/100/1000 Base T Bluetooth & RF Compatible with IEC 61000-4-5 (Surge): 24A, 8/20s - Level 2(Line- Gnd) & Level 3(Line-Line) 500 Watts Peak Pulse Power per Line (tp = 8/20s) Bidirectional Configuration Available in Multiple Voltages Ranging from 3V to 15V Protects Up to Six Lines Low Capacitance: 8pF RoHS Compliant REACH Compliant MECh ANICAL Ch ARACTERISTICS Molded JEDEC SO-8 Package Approximate Weight: 70 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C 12mm Tape and Reel Per EIA Standard 481 Flammability Rating UL 94V-0 PIN CONFIGURATION I/O I/O I/O GND 8 7 6 5 1 2 3 4 I/O I/O I/O GND www.protekdevices.com 05102.R9 9/12 Page 1 05102PLCDA03C-6 - PLCDA15C-6 Only One Name Means ProTekTion TYPICAL DEVICE Ch ARACTERISTICS MAXIMUM RATINGS 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature T -55 to 150 C L Storage Temperature T -55 to 150 C STG Peak Pulse Power (tp = 8/20s) - See Figure 1 P 500 Watts PP ELECTRICAL Ch ARACTERISTICS PER LINE 25C Unless Otherwise Specified PART DEVICE RATED MINIMUM MAXIMUM MAXIMUM MAXIMUM NUMBER MARkING STAND-OFF BREAkDOWN CLAMPING LEAkAGE CAPACITANCE VOLTAGE VOLTAGE VOLTAGE CURRENT (Note 1) (Fig. 2) 1mA I = 1A V 0V, 1Mhz P WM V V V I C WM (BR) C D VOLTS VOLTS VOLTS A pF PLCDA03C-6 PRS 3.3 4.5 7.0 125 8 PLCDA05C-6 PRT 5.0 6.0 9.8 20 8 PLCDA08C-6 PRW 8.0 8.5 13.4 10 8 PLCDA12C-6 PRV 12.0 13.3 19.0 2 8 PLCDA15C-6 PRU 15.0 16.7 24.0 2 8 NOTES 1. Capacitance between I/O pins and ground (pins 4 and 5) is typically 8pF. Capacitance between I/O pins is typically 4pF. FIGURE 1 PEAk PULSE POWER VS PULSE TIME 10,000 1,000 500W, 8/20s Waveform 100 10 0.1 1 10 100 1,000 10,000 t - Pulse Duration - s d www.protekdevices.com 05102.R9 9/12 Page 2 05102 P - Peak Pulse Power - Watts PP