PLCDA03 - PLCDA24 Only One Name Means ProTekTion 500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PLCDAxx Series are ultra low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and CMOS bus line applications against the damaging eects of Eff SD, tertiary lightning and switching transients. The PLCDAxx Series has a peak pulse power rating of 500 Watts for an 8/20s waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-8 PACkAGE APPLICATIONS FEATURES Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Computer Interface Protection Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns Ethernet - 10/100/1000 Base T Audio/Video Inputs Compatible with IEC 61000-4-5 (Surge): 24A, 8/20s - Level 2(Line- Cellular Phone Terminals Gnd) & Level 3(Line-Line) 500 Watts Peak Pulse Power per Line (tp = 8/20s) Bidirectional Configuration Available in Multiple Voltages Ranging from 3V to 24V Protects Two Lines Ultra Low Capacitance: 5pF RoHS Compliant REACH Compliant MECh ANICAL Ch ARACTERISTICS Molded JEDEC SO-8 Package Approximate Weight: 70 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C 12mm Tape and Reel Per EIA Standard 481 Flammability Rating UL 94V-0 PIN CONFIGURATION 8 7 6 5 1 2 3 4 www.protekdevices.com 05076.R9 11/10 Page 1 05076PLCDA03 - PLCDA24 Only One Name Means ProTekTion TYPICAL DEVICE Ch ARACTERISTICS MAXIMUM RATINGS 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature T -55 to 150 C L Storage Temperature T -55 to 150 C STG Peak Pulse Power (tp = 8/20s) - See Figure 1 P 500 Watts PP ELECTRICAL Ch ARACTERISTICS PER LINE 25C Unless Otherwise Specified PART DEVICE RATED MINIMUM MAXIMUM MAXIMUM MAXIMUM NUMBER MARkING STAND-OFF BREAkDOWN CLAMPING LEAkAGE CAPACITANCE (Note 1) VOLTAGE VOLTAGE VOLTAGE CURRENT (Note 2) (Fig. 2) 1mA I = 1A V 0V, 1Mhz P WM V V V I C WM (BR) C D VOLTS VOLTS VOLTS A pF PLCDA03 SGA 3.3 4.5 7.0 125 5 PLCDA05 SGB 5.0 6.0 9.8 20 5 PLCDA08 SGF 8.0 8.5 13.4 10 5 PLCDA12 SGC 12.0 13.3 19.0 1 5 PLCDA15 SGD 15.0 16.7 24.0 1 5 PLCDA24 SGE 24.0 26.7 43.0 1 5 NOTES 1. Devices are designed to be used in parallel (see application). For other applications, contact the factory. Do not apply surge in the forward direction of this device. 2. Do not surge from pins 8 to 1, 2 to 7, 6 to 3, and 4 to 5. PIV typically greater than 100V for each rectifier diode. Electrical characteristics apply to pins 1 to 8, 7 to 2, 3 to 6 and 5 to 4. www.protekdevices.com 05076.R9 11/10 Page 2 05076