SM1603 - SM1624C Only One Name Means ProTekTion 500 WATT MULTI-LINE TVS ARRAY DESCRIPTION The SM16xx and SM16xxC Series are multi-line transient voltage suppressor arrays that provides board level protec - tion for standard TTL and MOS bus line applications against the damaging eects of Eff SD, tertiary lightning and switch- ing transients. This series has a peak pulse power rating of 500 Watts for an 8/20s waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-16 PACKAGE APPLICATIONS FEATURES Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Wireless Communication Circuits Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns RS-422, RS-432 & RS-485 Low Voltage ASICs Compatible with IEC 61000-4-5 (Surge): 12A, 8/20s - Level 1(Line- Portable Electronics Gnd) & Level 2(Line-Line) 500 Watts Peak Pulse Power per Line (tp = 8/20s) Unidirectional and Bidirectional Configurations MECHANICAL CHARACTERISTICS ESD Protection > 25 kilovolts Available in Multiple Voltages Ranging from 3.3V to 24V Molded JEDEC SO-16 Package Protects up to 8 Lines Approximate Weight: 0.15 grams RoHS Compliant Lead-Free Pure-Tin Plating (Annealed) REACH Compliant Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C 16mm Tape and Reel Per EIA Standard 481 Flammability Rating UL 94V-0 PIN CONFIGURATIONS 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 UNIDIRECTIONAL 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 BIDIRECTIONAL ISO 9001: 2015 CERTIFIED 05147.R9 5/18 Page 1 05147SM1603 - SM1624C Only One Name Means ProTekTion TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature T -55 to 150 C L Storage Temperature T -55 to 150 C STG Peak Pulse Power (tp = 8/20s) - See Figure 1 P 500 Watts PP ELECTRICAL CHARACTERISTICS PER LINE 25C Unless Otherwise Specified PART RATED MINIMUM MAXIMUM MAXIMUM MAXIMUM MAXIMUM TEMPERATURE NUMBER STAND-OFF BREAKDOWN CLAMPING CLAMPING LEAKAGE CAPACITANCE COEFFICIENT (Note 1-2) VOLTAGE VOLTAGE VOLTAGE VOLTAGE CURRENT OF V (BR) (Fig. 2) (Fig. 2) 1mA I = 1A V 0V, 1MHz P WM V V V 8/20s I C qV WM (BR) C D (BR) VOLTS VOLTS VOLTS V I A pF mV/C C PP SM1603 3.3 4.0 7.0 10.9V 43A 125 800 -3 SM1603C 3.3 4.0 7.0 10.9V 43A 125 450 -3 SM1605 5.0 6.0 9.8 13.5V 42A 10 550 3 SM1605C 5.0 6.0 9.8 13.5V 42A 10 310 3 SM1608 8.0 8.5 13.4 16.9V 34A 10 500 9 SM1608C 8.0 8.5 13.4 16.9V 34A 10 280 9 SM1612 12.0 13.3 19.0 25.9V 21A 2 185 16 SM1612C 12.0 13.3 19.0 25.9V 21A 2 105 16 SM1615 15.0 16.7 25.5 30.0V 17A 2 140 17 SM1615C 15.0 16.7 25.5 30.0V 17A 2 80 17 SM1624 24.0 26.7 40.0 49.0V 12A 2 88 26 SM1624C 24.0 26.7 40.0 49.0V 12A 2 50 26 NOTES 1. Part numbers with a C suffix are bidirectional devices, i.e., SM1615C. 2. V = 1.5 Volts 100mA, 300s (square wave) unidirectional devices only. F ISO 9001: 2015 CERTIFIED 05147.R9 5/18 Page 2 05147