SMDB12-LF ProTek Devices

SMDB05 - SMDB24C Only One Name Means ProTekTion 800 WATT MULTI-LINE TVS ARRAY DESCRIPTIo N The SMDBxx and SMDBxxC Series are multi-line transient voltage suppressor arrays that provides board level protec - tion for standard TTL and MOS bus line applications against the damaging eects of Eff SD, tertiary lightning and switch- ing transients. The SMDB Series has a peak pulse power rating of 800 Watts for an 8/20s waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. So -8 PACkAGE APPLICATIo NS FEATURES Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV RS-232, RS-422 & RS-423 Data Lines Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns SMART Phones Audio/Video Inputs Compatible with IEC 61000-4-5 (Surge): 24A, 8/20s - Level 2(Line- Portable Electronics Gnd) & Level 3(Line-Line) 800 Watts Peak Pulse Power per Line (tp = 8/20s) Wireless Network Systems Unidirectional and Bidirectional Configurations Medical Electronics Available in Multiple Voltages Ranging from 5V to 24V Protects up to Four Lines RoHS Compliant REACH Compliant MECh ANICAL Ch ARACTERISTICS Molded JEDEC SO-8 Package Approximate Weight: 70 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C 12mm Tape and Reel Per EIA Standard 481 Flammability Rating UL 94V-0 PIN Co NFIGURATIo NS 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 UNIDIREC TIONAL BIDIREC TIONAL www.protekdevices.com 05166.R4 9/10 Page 1 05166SMDB05 - SMDB24C Only One Name Means ProTekTion TYPICAL DEVICE Ch ARACTERISTICS MAXIMUM RATINGS 25C Unless otherwise Specified PARAMETER SYMBo L VALUE UNITS Operating Temperature T -55 to 150 C L Storage Temperature T -55 to 150 C STG Peak Pulse Power (tp = 8/20s) - See Figure 1 P 800 Watts PP Forward Voltage 100mA, 300s - Square Wave (See Note 1) V 1.5 Volts F No TE 1. Only applies to unidirectional devices. ELECTRICAL Ch ARACTERISTICS PER LINE 25C Unless otherwise Specified PART DEVICE RATED MINIMUM MAXIMUM MAXIMUM MAXIMUM MAXIMUM NUMBER MARkING STAND-o FF BREAkDo WN CLAMPING CLAMPING LEAkAGE CAPACITANCE (Note 1) Vo LTAGE Vo LTAGE Vo LTAGE Vo LTAGE CURRENT (Fig. 2) (Fig. 2) 1mA I = 1A V 0V, 1Mhz P WM V V V 8/20S I C WM (BR) C D Vo LTS Vo LTS VoLTS V I A pF C PP SMDB05 PDA 5.0 6.0 9.8 24.6V 45.0A 25 880 SMDB05C PDB 5.0 6.0 9.8 24.6V 45.0A 25 493 SMDB08 PDJ 8.0 8.5 13.4 25.5V 40.0A 10 800 SMDB08C PDK 8.0 8.5 13.4 25.5V 40.0A 10 450 SMDB12 PDC 12.0 13.3 19.0 32.9V 34.0A 2 440 SMDB12C PDD 12.0 13.3 19.0 32.9V 34.0A 2 248 SMDB15 PDE 15.0 16.7 24.0 38.5V 27.0A 2 400 SMDB15C PDF 15.0 16.7 24.0 38.5V 27.0A 2 225 SMDB24 PDG 24.0 26.7 43.0 48.5V 20.0A 2 275 SMDB24C PDH 24.0 26.7 43.0 48.5V 20.0A 2 155 No TES 1. Part numbers with a C suffix are bidirectional devices, i.e., SMDB05C. www.protekdevices.com 05166.R4 9/10 Page 2 05166