The MICRO miller MF 70 and the MICRO compound table KT 70 are now also available as CNC-ready version. MICRO miller MF 70/CNC-ready With step motors for axes X (transverse), Y (lengthwise) and Z (high) instead of handwheels. Interesting for users who already own a control unit or would like to purchase one from another provider on the market. Step motors and reference point switch with 2.2m con- necting cable and one each standard plug (SUB-D 9-pole) for X, Y and Z axis. Without CNC control unit, without CNC software. Other technical design similar to MICRO miller MF 70 offered at right. Exception: Larger T-slot table and somewhat longer travel distances X (transverse) and Y (lengthwise). Including MICROMOT collets (steel, hardened, triple slit), with 1 each of 1 1.5 2 2.4 3 and 3.2mm. The illustrated stepped steel clamping jaws are also included in the delivery. Technical data: 220 240V. 100W. 50/60Hz. Spindle speeds 5,000 - 20,000rpm. Table 250 x 70mm. Travel distances: X (transverse) 150mm, Y (lengthwise) 70mm, Z (high) 70mm. Resolution of step motors 0.005mm. Total height 370mm. Weight approx. 7kg. NO 27 112 MICRO compound table KT 70/CNC-ready Of solid aluminium (surface-compacted), as described at right. With two step motors for the axes X (transverse) and Y (lengthwise). Table size and travel distances, see description of MF 70/CNC-ready. NO 27 114 Dividing head for MICRO miller MF 70 and Precision steel vice PM 40 MICRO compound table KT 70 Milled from steel for precision. Completely angular. For machining circular work pieces, Jaw width 46mm, manu-facturing off-set holes and milled clamping capacity out portions, milling key surfaces, four- 34mm. Total length sided, six-sided materials, etc. Absolute 70mm. Especially accurate division due to nonius at the suited for filigree base body. With reversed chuck jaws: and accurate work- Capacity inside 1.5 to 32mm, outside 12 ing with the MICRO to 65mm. Bore of 11mm (for processing miller MF 70 or the longer spindles in a vertical position). compound table KT 70. Sliding blocks and fixing screws With fastening bores for horizontal and included. Comes in a wooden box. vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 and the MICRO compound table KT 70. Size 72 x 64 x 38mm. In wooden box with sliding lid. NO 24 264 NO 24 260 50X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Proxxon manufacturer: Other Similar products are found below : PRN28510 UHZ FD 150/E 24154 28321 28856 PRN20392 PR23100 PR23296 28017 PR23084 24140 24156 PRN23604 PRN23000 TBM 220 FF 230 28320 28720 28808 23821 PRN23090 28980 PR23350 PRN28515 28752 28020 28710 PRN28472 28732 28810 28854 23800 28983 28812 28852 PRN23040 24152 28148 28987 23820 28583 28830 28750 28840 PRN28820 PR23822 MS 4 28582 PR23821