This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. 2017, PUI Audio Inc. Data Sheet AS01506MS-SP15-WP-R PUI Audios Mobile Series line of speakers and receivers is designed for cutting- edge applications such as smart watches and pendants, Wi-Fi enabled security devices and action cameras, mobile radios and smart phones, as well as IoT devices. Each Mobile Series product features an IP67-rated face for protection against dust and water ingress. The six ohm 15mm x 11mm speaker is designed for AS01506MS-SP15-WP-R high fidelity audio reproduction in the thinnest size possibleonly 2.5mm thick Solder pads allow for lead wire connection. Features: PEEK diaphragm for flat frequency response 93 dB output (2V 10cm) High-energy neodymium motor Only 2.5 mm thick Dustproof and waterproof IP67-rated face Specifications Parameters Values Units Rated Input Power 1 Watts Max Input Power 1.2 Watts Impedance 6 20% Ohms Sensitivity (SPL 2.45V/10cm) At 2 kHz in 1cc enclosure 93 3 dB Resonant Frequency (free air/in 1cc enclosure) 65020% / 90020% Hz Frequency Range 650 ~ 20,000 Hz Frame Material PBT - Magnet Material NdFeB - Weight 1.5 Grams Environmental Protection Rating IP67 - PUI Audio, Inc. A Projects Unlimited Company, 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. 2017, PUI Audio Inc. Specifications (continued) Should not be audible with 2.45V sine wave from 200 Hz to 2 kHz - Buzz, Rattle, etc. in 1cc enclosure When positive voltage is applied to the positive terminal, the - diaphragm will move outward Polarity Storage Temperature -40 ~ +85 C Operating Temperature -20 ~ +70 C Measurement Method (measured with 2.45V, Temperature: 15 ~ 35C, Relative Humidity: 25%~70%) Standard test condition of speaker Power Amplifier Microphone B&K Type 4191 Speaker Standard Baffle Board Recommended In IEC 268-5 Where 1650mmx1350mm Audio Analyzer B&K Type 2012 Frequency Response (measured with 2.45V 10cm in 1cc enclosure) PUI Audio, Inc. A Projects Unlimited Company, 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925