SMT POWER INDUCTORS Toroid - HCCI-80 Series Height: 12.7mm Max Footprint: 31.0mm x 25.4mm Max Current Rating: up to 38A Inductance Range: 1.1H to 18.1H 6 Electrical Specifications 25C Operating Temperature -40C to +130C 4,5 Pulse Inductance Inductance Reference Flux Density Core Loss Temp. Rise DCR (m) Irated Part Irated 0ADC ET Factor Factor Factor Connection (A) TYP MAX Number (H TYP) (H 15%) (Volt-sec) (K1) (K2) (K3) P0599NL 1.1 38 1.1 1.3 2.1 4.20 0.62 1.50E-09 33.8 Parallel P0598NL 1.6 34 1.4 1.6 3.9 4.20 0.48 1.50E-09 33.8 Parallel P0597NL 2.45 27 2.2 2.5 5.7 6.00 0.39 1.50E-09 33.8 Parallel P0596NL 3.2 24 3.0 3.5 8.0 4.20 0.33 1.50E-09 33.8 Parallel P0599NL 4.3 19 4.4 5.1 8.4 8.40 0.31 1.50E-09 33.8 Series P0595NL 4.52 19 4.2 4.8 10.5 9.00 0.29 1.50E-09 33.8 Parallel P0598NL 6.4 17 5.6 6.4 15.6 8.40 0.24 1.50E-09 33.8 Series P0597NL 9.8 13.5 8.8 10.1 22.8 12.00 0.20 1.50E-09 33.8 Series P0596NL 12.8 12 12.0 13.8 32.0 8.40 0.17 1.50E-09 33.8 Series P0595NL 18.1 9.5 16.8 19.3 42.0 18.00 0.14 1.50E-09 33.8 Series NOTES: 1. Temperature rise is 55C in typical buck or boost circuits operating 2 CopperLoss = Irms * DCR Typical (m) / 1000 at 300kHz with the rated Idc current and reference ET applied to the 1.26 2.11 CoreLoss = K2 * (Freq kHz) * (B) inductor. B = K1 * Volt-sec * 100 2. Total loss in the inductor is 1.8W for 55C temperature rise above 4.Optional Tape & Reel packaging can be ordered by adding a ambient. suffix to the part number (i.e. P0595NL becomes P0595NLT). Pulse 3.In high volt-time applications, additional heating in the component complies to industry standard tape and reel specification EIA481. can occur due to core losses in the inductor which may necessitate 5. TheN suffix indicates an RoHS-compliant part number. Non-NL derating the current in order to limit the temperature rise of the suffixed parts are not necessarily RoHS compliant, but are electrically component. In order to determine the approximate total losses and mechanically equivalent to NL versions. If a part number does (or temperature rise) for a given application, both copper and core not have theN suffix, but an RoHS compliant version is required, losses should be taken into account. please contact Pulse for availability. 6. The temperature of the component (ambient plus temperature rise) Estimated Temperature Rise: .833 must be within the stated operating temperature range. Trise = K3 * (Coreloss(W) + Copperloss(W)) (C) Mechanical 5 , 5 , , 3. 3. , 04( , , 8 Schematic 9: < 0 (>(: 1 1 1 4 , Weight . 18.7 grams ) ** ) + + %& - 3 2 , Tape & Reel . 75/reel Tube 20/tube 1:1 1% - Inches Dimensions: , mm Unless otherwise specified, .010 all tolerances are , 0,25 , &34 *& USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 76 SPM2007 (11/07)X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Coupled Inductors category: Click to view products by Pulse manufacturer: Other Similar products are found below : NPIS48LS1R0YTRF UP2-150-R NPIS21LS2R2MTRF NIN-HCR27JTRF CPL-4-50TR-R SRP2313AA-220M SRR3818A-330M SRP2313AA-330M HM78D-755470MLFTR P0175NL FPT705-150-R HM78D-1288R2MLFTR SRF1280-1R5Y 47100C DRQ125-102-R 48100C CTX16-18405-R 74485542820 DRQ125-820-R 74485542680 CTX68-4A-R CTX50-3P-R CTX5-1-R DRQ127-R47-R SRF4530A- 101Y CTX15-2P-R HM78D-755220MLFTR HA78D-1284R7MLFTR CTX16-17769-R HM78D-1210680MLFTR CTX150-4A-R 74485540820 476R8C 47101C 48220C CL1108-4-50TR-R CL-12-24 SRF1280-R47Y CL-4-8 47330C 47220C 74485540101 CL-1-2 CL- 2-4 CL-6-12 PM3602-150-RC PM3602-5-RC PM3602-200-RC PM3602-250-RC PM3602-300-RC