PA0909NL Pulse

High Frequency Planar Transformers PA09XXNL Series (up to 250W) Power Rating: up to 250W Height: 9.1mm to 10.4mm Max Footprint: 29.5mm x 26.7mm Max Frequency Range: 200kHz to 700kHz Isolation (Primary to Secondary): 1750VDC Electrical Specifications 25C - Operating Temperature -40C to +125C 1 2 Turns Ratio DCR (m MAX) Primary Leakage Maximum Part Schematic Inductance Inductance Height Primary Primary Primary Number Primary A Secondary Secondary (H MIN) (H MAX) (mm) A B Aux. Double Interleave Designs (Higher Efficiency, Lower DCR and Lower Leakage) PA0901NL 4T & 4T 216 0.3 13 13 - PA0903NL 5T & 5T (w/5T aux) 340 0.3 15 15 235 4T PA0905NL 6T & 6T (w/2T aux) A1 480 0.3 21 21 78 4.5 10.2 (1T:1T:1T:1T) PA0907NL 7T & 7T (w/3T aux) 660 0.3 50 50 100 PA0909NL 8T & 8T 860 0.3 60 60 - PA0908NL 4T & 4T 216 0.3 13 13 - PA0910NL 5T & 5T (w/5T aux) 340 0.3 15 15 235 1T & 1T A2 PA0912NL 6T & 6T (w/2T aux) 480 0.3 21 21 78 0.56 & 0.56 10.2 PA0914NL 7T & 7T (w/3T aux) 660 0.3 50 50 100 Single Interleave Designs (Lower Cost) PA0930NL 4T 54 0.3 13 - - 4T B1 (1T:1T:1T:1T) PA0931NL 5T (w/5T aux) 85 0.3 15 - 470 PA0934NL 4T 54 0.3 13 - - PA0935NL 5T (w/5T aux) 85 0.3 15 - 470 PA0936NL 6T (w/2T aux) 7T & 7T B2 120 0.3 21 - 156 40 & 40 9.1 PA0937NL 7T (w/3T aux) 165 0.3 50 - 200 PA0947NL 8T 215 0.3 60 - - PA0943NL 5T (w/5T aux) 2T & 1T B3 85 0.3 15 - 470 1.8 & 0.6 9.1 Notes: 1. Inductance is measured, where applicable, with both primary windings connected in 2. Leakage inductance is measured with both primary windings connected in series series (2 to 5, with 3 and 4 shorted). (where applicable) with all other windings shorted. 1 power.pulseelectronics.com SPM2007 53 (03/19) High Frequency Planar Transformers PA09XXNL Series (up to 250W) Mechanical PA090X Weight ...........................19.8grams NOTES: The above is a universal footprint for a component that Tray ......................................30/tray has all 11 pins populated. For a given part number, it is only .Inches Dimensions: mm necessary to provide pads for the terminations shown in the Unless otherwise specified, .0.010 schematic below. all tolerances are: 0,25 Schematics PA090X 2 power.pulseelectronics.com SPM2007 53 (03/19)