High Frequency Wire Wound Transformers ER Platforms - ER9.5, ER11 and ER14.5 Transformers and Inductors Power: 1W to 9W Three Different SMT Platforms Custom designs available Electrical Specifications 25C - Operating Temperature -40C to +125C 3, 4 Turns Ratio DCR (m MAX) Part Primary Prinary Leakage 2 Number Application Secondary Inductance Inductance Pri. Sec. Sec. Pri. Sec. Pri. Aux. Isolation (H MIN) (H MAX) Pri. Aux. A B ER9.5 - 8 PIN SMT - (12.1mm x 10.7mm x 6.6mm MAX) 2.4W Flyback Transformer 1500Vdc 132 700 820 185 N/A PB2090NL Vin=36-72v, Freq.=200kHz 0.330 5 1 0.33 Operational 0.41A Vout=12v/0.2A, 12v/.05mA 1.25W Flyback Transformer 1500Vdc 62 50 N/A 3 350 650 PB2109NL Vin=18-36v, Freq.=200kHz 0.714 0.287 1 Operational 0.52A Vout=5v/0.25A, 12v/50mA 2.4W Flyback Transformer 1500Vdc 32 180 820 185 N/A 0.680 2 PB2110NL Vin=18-36v, Freq.=200kHz 1 0.68 Operational 0.8A Vout=12v/0.2A, 12v/50mA .5W Flyback Transformer 1000Vdc 814 0.42 364 364 11 5772 N/A PB2135NL N/A Vin=20-30v, Freq.=200kHz 1 Operational 0.8A 0.42 Vout=5v/50mA 2.6W Flyback Transformer 2500Vdc 1.11 (5v) 97 73 4.6 0.15 100 N/A N/A Vin=4.5-5.5v, Freq.=200kHz 1 PA0663NL Operational 1.33 (6v) Vout=5v/0.5A, 6v/0.02mA ER11 - 10 PIN SMT - (12.7mm x 11.4mm x 6.6mm MAX) 5W Flyback Transformer 1500Vdc 1.65 250 15 N/A 46.6 380 PA1032NL Vin=30-57v, Freq.=250kHz 0.166 0.500 1 Operational Vout=3.3v/1.5A, 10v/15mA 6W Flyback Transformer 85 500Vdc 1100 298 298 2.5 490 0.393 0.393 Vin=18-36v, Freq.=200kHz 1 PB2162NL 0.8A Operational Vout=12v/0.25A, 12v/20mA ER14.5 - 10 PIN SMT - (16.5mm x 15.5mm x 7.6mm MAX) 5W Flyback Transformer 1500Vdc 152 5 670 750 21 N/A PA1006NL Vin=30-57v, Freq.=250kHz 0.462 1 0.154 Operational Vout=3.3v/1.5A, 10v/15mA 5W Flyback Transformer 1500Vdc 152 670 830 10 N/A 5 PA1026NL Vin=30-57v, Freq.=250kHz 0.500 1 0.115 Operational Vout=3.3v/1.5A, 10v/15mA 5W Flyback Transformer 1500Vdc 10 N/A 152 5 670 450 0.269 PA1085NL Vin=30-57v, Freq.=250kHz 1 0.115 Operational Vout=3.3v/1.5A, 10v/15mA pulseelectronics.com SPM2007 (05/16) 96High Frequency Wire Wound Transformers ER Platforms - ER9.5, ER11 and ER14.5 Notes: 3. Add T suffix to the part number for Tape & Reel version (i.e. PA1032NL T). 1. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 2. The above transformers and inductors have been tested and approved by Pulses power IC partners and are sited in the appropriate datasheet or evaluation board documentation at these companies. To determine which IC and IC partners are matched with the above Pulse part numbers please consult the IC Cross Reference on the Pulse website. Mechanicals ER9.5 .027 8X 0.79 85 .063 8X 1,60 .475 12,07 Part Number .079 Date Code 6X 2,00 Country of Origin .063 8X 14 1,60 .398 10,11 .079 8X 2,00 SUGGESTED PAD LAYOUT (.237) (6,00) .420 .323 MAX MAX 10,67 8,20 .260 .010 6,60 0,25 MAX .006/0,15 (.392) MAX (9,96) 8 SURFACES ER11 .450 MAX 11,43 10 6 .063 10X 1,60 .500 (.366) 12,70 (9,30) Part Number MAX Date Code - Country of Origin .079 8X .063 2,00 10X 1,60 .395 15 10,03 .079 SUGGESTED PAD LAYOUT 8X 2,00 (.315) (8,00) .260 6,60 MAX .006/0,15 .028 .024 .010 10X 0,71 0,61 0,25 10 SURFACES 97 pulseelectronics.com SPM2007 (05/16)