PA2607.181NLT Pulse

SMT Power Inductor Power Beads - PA2607.XXXNL/PA2607.XXXAHL Series Current Rating: Over 90 Apk Inductance Range: 115nH to 300nH Height: 7.5mm and 7.6mm Max Footprint: 10.4mm x 7.9mm Max 7 Electrical Specifications 25C Operating Temperature -40C to +130C 4 1 Saturation Current Inductance Inductance Heating Heigh 2 3 Part Number Irated DCR 6 (A TYP) 0ADC Irated Current mm* (ADC) (m nominal) (nH +/- 15%) (nH TYP) (A TYP) (inches) Commerical 25C 100C PA2607.121NL 115 115 41 94 80 7.4* PA2607.151NL 150 150 41 72 61 (.291) PA2607.181NL 175 175 41 62 53 0.29 +/- 7% (.XXNL) PA2607.211NL 215 195 41 48 41 41 0.29 +/- 5% (.XXXAHL) PA2607.231NL 230 208 37 43 37 7.3* (.287) PA2607.271NL 270 241 34 37 34 PA2607.301NL 300 260 28 32 28 NOTES: 1. Inductance measured at 100kHz, 100mVrms. core losses in the inductor which may neccessitate derating the current in order to limit 2. Inductance at Irated is the value of the inductance at 25C at the listed rated current. the temperature rise of the component. To determine the approximate total losses (or 3. The nominal DCR is measured from point a to point b , as shown below on the temperature rise) for a given application, the coreloss and temperature rise curves can mechanical drawing. The standard part (PA2607.XXXNL) has a DCR tolerance of +/-7%. be used. A tighter DCR tolerance of +/-5% is available by changing the NL suffix to AHL (i.e. 7. Optional Tape & Reel packaging can be ordered by adding a T suffix to the part num - PA2607.211NL becomes PA2607.211AHL). ber (i.e. PA2607.211NL becomes PA2607.211NLT). Pulse complies to industry standard 4. The saturation current is the typical current which causes the inductance to drop by tape and reel specification EIA481. 20% at the stated ambient temperatures (25C and 100C). This current is determined 8. The temperature of the component (ambient plus temperature rise) must be within by placing the component in the specified ambient environment and applying a short the stated operating temperature range. duration pulse current(to eliminate self-heating effects) to the component. 5. The heating current is the DC current which causes the part temperature to increase by approximately 40C. 6. In high volt*time applications, additional heating in the component can occur due to 1 power.pulseelectronics.com P673. M (02/20) Marking Marking SMT Power Inductor Power Beads - PA2607.XXXNL/PA2607.XXXAHL Series Mechanical Schematic PA2607.XXXNL/PA2607.XXXHNL PA2607 .XXXNL D/C *Please note that marking shown is for the PA2607.XXXNL parts. CTRY Marking for AHL parts is the same except PA2607.XXXNL is replaced by PA2607.XXXAHL. Weight ..............................2.4grams Tape & Reel ........................400/reel Inches Dimensions: .008 mm 0.2 Unless otherwise specified, .010 all tolerances are 0,25 TAPE & REEL INFO W A K0 P1 G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) QTY PART NUMBER A G P1 W K0 PCS/REEL PA2607.XXXNL/PA2607.XXXHNL 330 24.4 16.0 24.0 8.1 400 2 power.pulseelectronics.com P673. M (02/20)