PA2743NL Pulse

SMT Common Mode Chokes 1.0A to 20.0A Wide variety of package sizes available 1Arms to 20Arms current rating Inductances from 61uH to 10mH Dielectric strength: 1500Vrms (380Vrms continuous) Electrical Specifications at 25 deg C Temp Range -40 C to 125 C 4 Inductance Package Size 1 Irated DCR per Winding Leakage Inductance Part Number per Winding Package Name L x W x H (Arms or Adc) (m Max) (uH Min) (uH +30%/-35%) (mm Max) PA2742NL 397 1 92 0.6 High Shasta 9.1 x 8.9 x 7.9 PA2741NL 94 1.1 30 0.3 Low Shasta 9.1 x 8.9 x 3.8 PA2752NL 10150 1.4 210 25 LCCI-50 19.6 x 17.0 x 9.9 PA2748NL 1125 1.8 55 3 Polecat 12.7 x 13.2 x 5.6 PA3927NL 800 3 27 1.5 Polecat 13x13x8.6 PA2743NL 383* 3.3 18 1 Polecat 13.0 x 13.0 x 5.6 PA2749NL 536 3.8 17.1 1.2 LCCI-37 16.4 x 14.2 x 8.9 PA2744NL 280 4 13.2 0.7 Polecat 13.0 x 13.0 x 5.6 PA2751NL 486 4.2 16 1 LCCI-44LP 18.2 x 15.0 x 7.6 PA2745NL 130* 5 6.75 0.4 Polecat 13.2 x 13.2 x 5.6 PA2746NL 96* 6 4.3 0.25 Polecat 13.2 x 13.2 x 5.6 PA2750NL 400 6 9.4 1.25 LCCI-44 18.2 x 15.0 x 10.0 PA2747NL 61* 7 2.9 0.15 Polecat 13.5 x 13.5 x 5.6 PA2756NL 484 8 7.7 1.5 LCCI-50 19.6 x 17.0 x 9.9 PA2757NL 1030 9 9.75 3 HCCI-80 31.0 x 25.4 x 12.7 PA2754NL 215 10 3.75 0.5 Makeni 21.1 x 19.1 x 11.2 PA2753NL 95 12.5 3 0.15 LCCI-50 19.6 x 17.0 x 9.9 PA2755NL 117 14 1.95 0.3 Makeni 21.1 x 19.1 x 11.2 PA2670NL 500 16 4.25 1.5 HCCI-80 31.0x25.4x12.7 PG1265NL 380 20 4.1 1.2 HCCI-80 31.0x25.4x12.7 NOTE: 1. The current rating (Irated) is based upon the temperature rise of the component and represents the rms current which will cause a typical temperature rise of 55C with 50LFM forced cooling 2. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 3. Optional Tape & Reel packaging can be ordered by adding a T suffix to the part number (i.e. PA2741NL becomes PA2741NLT). Pulse complies to industry standard tape and reel specification EIA481. 4. Components identified by an asterisk have an inductance tolerance of +/- 35%. All other components are +30/-35%. 5. Parts marked with the AEC-Q200 symbol are AEC-Q200 qualified. Parts not identified as AEC-Q200 are still under test. SMT Common Mode Chokes 1.0A to 20.0A Impedance Plots 700 600 500 400 300 200 100 0 0.11 10 100 Frequency (MHz) PA2741NL PA2745NL PA2746NL PA2747NL PA2753NL PA2754NL PA2755NL 3500 3000 2500 2000 1500 1000 500 0 0.11 10 100 Frequency (MHz) PA2742NL PA2743NL PA2744NL PA2748NL PA2749NL PA2750NL PA2751NL PA2756NL PA2757NL