I A T F SMT Power Inductors Molded Power Inductor - PA4340.XXXNLT AND PM4340.XXXNLT Series POWER PRODUCTS Height: 3.0mm Max Footprint: 6.0mm x 5.4mm Max Current Rating: up to 23A Inductance Range: 0.10uH to 33uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Electrical Specifications 25C - Operating Temperature -55C to +125C 5 3 DC Resistance 2 Inductance Rated Saturation 6,7 6,7 100KHz, 1V Current Current Commercial Automotive TYP. MAX. uH20% A m m A PA4340.101NLT PM4340.101NLT 0.10* 23 2.5 3.0 27 PA4340.151NLT PM4340.151NLT 0.15* 18 2.3 2.7 30 PA4340.201NLT PM4340.201NLT 0.20* 16 2.6 3.2 25 PA4340.221NLT PM4340.221NLT 0.22* 15.5 3.7 4.4 21 PA4340.331NLT PM4340.331NLT 0.33 14 4.3 5.0 18 PA4340.471NLT PM4340.471NLT 0.47 12 6.4 7.4 16 PA4340.561NLT PM4340.561NLT 0.56 10 8.0 10 15 PA4340.681NLT PM4340.681NLT 0.68 8.5 10 12 14 PA4340.821NLT PM4340.821NLT 0.82 8.0 11.5 13 12.5 PA4340.102NLT PM4340.102NLT 1.0 7.0 13 14 11 PA4340.122NLT PM4340.122NLT 1.2 6.5 14 16 11 PA4340.152NLT PM4340.152NLT 1.5 6.0 16 25 10 PA4340.222NLT PM4340.222NLT 2.2 5.5 25 35 9.0 PA4340.332NLT PM4340.332NLT 3.3 5.0 32 38 8.0 PA4340.362NLT PA4340.362NLT 3.6 4.9 46 54 7.0 PA4340.472NLT PM4340.472NLT 4.7 4.6 50 53 6.0 PA4340.562NLT PM4340.562NLT 5.6 4.25 55 63 4.5 PA4340.682NLT PM4340.682NLT 6.8 4.0 68 76.2 4.3 PA4340.103NLT PM4340.103NLT 10 2.75 110 128 3.5 PA4340.153NLT PM4340.153NLT 15 2.1 165 190 2.6 PA4340.183NLT PM4340.183NLT 18 2.0 195 230 2.3 PA4340.223NLT PM4340.223NLT 22 1.9 220 250 1.7 PA4340.333NLT PM4340.333NLT 33 1.6 380 440 1.6 Power.PulseElectronics.com P767.M (06/20) 1 1 6 9 4 9Marking Marking SMT Power Inductors Molded Power Inductor - PA4340.XXXNLT AND PM4340.XXXNLT Series POWER PRODUCTS Notes: 1. Actual temperature of the component during system operation (ambient plus 5. Please note that the inductance tolerance of all parts are +/-20% except those temperature rise) must be within the standard operating range. indicated with a * which are +/-30%. 2. The saturation current is the current at which the initial inductance drops approxi- 6. Parts shown in bold are standard catalog parts and are available through sample mately 30% at the stated ambient temperature. This current is determined by placing stock and distribution. Parts in lighter font are available but are not necessarily held the compnent in the specified ambient environment and applying a short duration in sample stock or distribution and lead times may be longer. Please contact Pulse pulse current (to eliminate self-heating effect) to the component. for availablity. 3. The rated current is the DC current required to raise the component temperature by 7. Both the PA and PM part numbers are AEC-Q200 qualified parts. The PM part numbers approximately 40C. Take note that the components performanc varies depending have full automotive IATF16949 certification. The PM part number dimensions are on the system condition. It is suggested that the component be tested at the system 100% tested in production but do not necessarily meet a product capability index level, to verify the temperature rise of the component during system operation. (Cpk)> 1.33 and therefore may not strictly conform to PPAP. 4. The part temperature (ambient+temp rise) should not exceed 125C under worst 8. Special characteristics case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Mechanical PA4340/ PM4340 Final Layout SUGGESTED PAD LAYOUT Series A B C D E F G H PA4340/PM4340 6.0 MAX 5.4 MAX 3.0 MAX (1.5) 3.5 MAX (1.8) (2.0) (2.5) All Dimensions in mm. TAPE & REEL INFO W A K0 P1 G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) QTY A G P W K PCS/REEL 1 0 PA4340/PM4340 330 12 8 12 3.3 2000 Power.PulseElectronics.com P767.M (06/20) 2