SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT Height: 3.0mm Max Footprint: 7.6mm x 6.9mm Max Current Rating: up to 32.5A Inductance Range: 0.1uH to 47.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Electrical Specifications 25C - Operating Temperature -55C to +125C 3 DC Resistance 2 5 Rated Saturation Inductance 6,7 6,7 Current Current 100KHz, 1V Commercial Automotive TYP. MAX. (uH 20%) A m m A PA4341.101NLT PM4341.101NLT 0.10* 32.5 1.2 1.7 60 PA4341.131NLT PM4341.131NLT 0.13* 27.6 1.3 1.8 50 PA4341.151NLT PM4341.151NLT .15* 27 1.5 1.9 45 PA4341.161NLT PM4341.161NLT .16* 27 1.5 1.9 45 PA4341.181NLT PM4341.181NLT .18* 25 1.7 2.3 43 PA4341.191NLT PM4341.191NLT .19* 24 1.8 2.5 41 PA4341.201NLT PM4341.201NLT .20* 24 1.8 2.5 41 PA4341.221NLT PM4341.221NLT .22* 23 2.1 2.8 40 PA4341.241NLT PM4341.241NLT .24 22 2.5 3.1 39 PA4341.251NLT PM4341.251NLT .25 21 3.3 3.5 39 PA4341.301NLT PM4341.301NLT 0.30 21 3.2 3.8 35 PA4341.331NLT PM4341.331NLT 0.33 20 3.5 3.9 32 PA4341.361NLT PM4341.361NLT 0.36 19 3.6 4.2 32 PA4341.471NLT PM4341.471NLT 0.47 17.5 4.0 4.2 26 PA4341.561NLT PM4341.561NLT 0.56 16.5 4.7 5.0 25.5 PA4341.601NLT PM4341.601NLT 0.60 16 4.7 5.2 25.5 PA4341.681NLT PM4341.681NLT 0.68 15.5 4.8 5.5 25 PA4341.751NLT PM4341.751NLT 0.75 14.5 5.5 6.6 24.5 PA4341.821NLT PM4341.821NLT 0.82 13 6.7 8.0 24 PA4341.901NLT PM4341.901NLT .90 11 8.3 10 22 PA4341.102NLT PM4341.102NLT 1.0 11 8.3 10 22 PA4341.122NLT PM4341.122NLT 1.2 10 10 12 20 PA4341.152NLT PM4341.152NLT 1.5 9.0 13 15 18 Power.PulseElectronics.com P768.O (08/20) 1SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT Electrical Specifications 25C - Operating Temperature -55C to +125C 3 DC Resistance 2 5 Rated Saturation Inductance 6,7 6,7 Current Current 100KHz, 1V Commercial Automotive TYP. MAX. (uH 20%) A m m A PA4341.182NLT PM4341.182NLT 1.8 8.5 14 17 16 PA4341.202NLT PM4341.202NLT 2.0 8.2 16 19 15 PA4341.222NLT PM4341.222NLT 2.2 8.0 18 20 14 PA4341.252NLT PM4341.252NLT 2.5 7.0 20 22 13 PA4341.272NLT PM4341.272NLT 2.7 7.0 24 27 13 PA4341.332NLT PM4341.332NLT 3.3 6.0 28 30 13.5 PA4341.472NLT PM4341.472NLT 4.7 5.5 37 40 10 PA4341.562NLT PM4341.562NLT 5.6 5.0 43 48 9.0 PA4341.682NLT PM4341.682NLT 6.8 4.5 54 60 8.0 PA4341.822NLT PM4341.822NLT 8.2 4.0 64 68 7.5 PA4341.103NLT PM4341.103NLT 10 3.5 75 85 6.0 PA4341.123NLT PM4341.123NLT 12 3.3 81 93 5.5 PA4341.153NLT PM4341.153NLT 15 3.0 107 123 4.0 PA4341.223NLT PM4341.223NLT 22 2.0 165 190 3.5 PA4341.333NLT PM4341.333NLT 33 2.0 200 240 2.5 PA4341.403NLT PM4341.403NLT 40 1.9 283 340 2.3 PA4341.473NLT PM4341.473NLT 47 1.75 302 363 2.0 Notes: 1. Actual temperature of the component during system operation (ambient plus 5. Please note that the inductance tolerance of all parts are +/-20% except those temperature rise) must be within the standard operating range. indicated with a * which are +/-30%. 2. The saturation current is the current at which the initial inductance drops 6. Parts shown in bold are standard catalog parts and are available through sample approximately 30% at the stated ambient temperature. This current is determined stock and distribution. Parts in lighter font are available but are not necessarily held by placing the compnent in the specified ambient environment and applying a short in sample stock or distribution and lead times may be longer. Please contact Pulse duration pulse current (to eliminate self-heating effect) to the component. for availablity. 3. The rated current is the DC current required to raise the component temperature by 7. Both the PA and PM part numbers are AEC-Q200 qualified parts. The PM part numbers approximately 40C. Take note that the components performanc varies depending have full automotive IATF16949 certification. The PM part number dimensions are on the system condition. It is suggested that the component be tested at the system 100% tested in production but do not necessarily meet a product capability index level, to verify the temperature rise of the component during system operation. (Cpk)> 1.33 and therefore may not strictly conform to PPAP. 4. The part temperature (ambient+temp rise) should not exceed 125C under worst 8. Special Characteristics case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Power.PulseElectronics.com P768.O (08/20) 2