PA4343.471NLT Pulse

SMT Power Inductor High Current Molded Power Inductor - PA4343.XXXNLT & PM4343.XXXNLT Series Height: 6.5mm Max Footprint: 14.0mm x 12.8mm Max Current Rating: up to 55.0A Inductance Range: 0.15uH to 47.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Electrical Specifications 25C - Operating Temperature -55C to +125C 5 3 DC Resistance 2 Inductance Rated Saturation 6,7 6,7 100KHz, 1V Current Current Commercial Automotive Mechanical TYP. MAX. uH20% A m m A PA4343.151NLT PM4343.151NLT 0.15* 55 0.49 0.6 118 Footprint 1 PA4343.221NLT PM4343.221NLT 0.22 53 0.47 0.6 112 Footprint 1 PA4343.301NLT PM4343.301NLT 0.3 48 0.6 0.72 72 Footprint 1 PA4343.331NLT PM4343.331NLT 0.33 46 0.65 0.8 68 Footprint 1 PA4343.361NLT PM4343.361NLT 0.36 45 0.7 0.9 66 Footprint 1 PA4343.401NLT PM4343.401NLT 0.4 44 0.7 1 64 Footprint 1 PA4343.451NLT PM4343.451NLT 0.45 42 0.9 1.2 63 Footprint 1 PA4343.471NLT PM4343.471NLT 0.47 41 0.9 1.2 63 Footprint 1 PA4343.501NLT PM4343.501NLT 0.5 40 0.92 1.25 60 Footprint 1 PA4343.561NLT PM4343.561NLT 0.56 37 1.05 1.2 58 Footprint 1 PA4343.681NLT PM4343.681NLT 0.68 35 1.25 1.5 55 Footprint 1 PA4343.821NLT PM4343.821NLT 0.82 33 1.5 1.9 50 Footprint 1 PA4343.102NLT PM4343.102NLT 1 30 1.7 2.3 48 Footprint 1 PA4343.142NLT PM4343.142NLT 1.4 27 2.1 2.6 46 Footprint 1 PA4343.152NLT PM4343.152NLT 1.5 27 2.5 3 45 Footprint 1 PA4343.182NLT PM4343.182NLT 1.8 27 3.6 4 40 Footprint 2 PA4343.222NLT PM4343.222NLT 2.2 22 3.8 4.2 37 Footprint 2 PA4343.272NLT PM4343.272NLT 2.7 20 4.3 5.5 32 Footprint 2 PA4343.332NLT PM4343.332NLT 3.3 18 5.7 6.8 30 Footprint 2 PA4343.472NLT PM4343.472NLT 4.7 13.5 7 8.4 28 Footprint 2 PA4343.562NLT PM4343.562NLT 5.6 12.5 8.5 10 23 Footprint 2 PA4343.682NLT PM4343.682NLT 6.8 11.5 9.5 11.5 18 Footprint 2 PA4343.822NLT PM4343.822NLT 8.2 10.5 12 15.5 15.5 Footprint 2 Power.PulseElectronics.com P770.L (08/20) 1SMT Power Inductor High Current Molded Power Inductor - PA4343.XXXNLT & PM4343.XXXNLT Series Electrical Specifications 25C - Operating Temperature -55C to +125C DC Resistance 5 3 2 Inductance Rated Saturation 100KHz, 1V Current Current 6,7 6,7 TYP. MAX. Commercial Automotive Mechanical uH20% A m m A PA4343.103NLT PM4343.103NLT 10 10 13.2 16.5 15.5 Footprint 2 PA4343.133NLT PM4343.133NLT 13 9 21 24 13 Footprint 2 PA4343.153NLT PM4343.153NLT 15 9 23.2 28 12.5 Footprint 2 PA4343.223NLT PM4343.223NLT 22 9 32.5 37 12 Footprint 2 PA4343.333NLT PM4343.333NLT 33 8 48 58 11 Footprint 2 PA4343.473NLT PM4343.473NLT 47 6.5 76 90 9.5 Footprint 2 Notes: 1. Actual temperature of the component during system operation (ambient plus verified in the end application. temperature rise) must be within the standard operating range. 5. Please note that the inductance tolerance of all parts are +/-20% except those 2. The saturation current is the current at which the initial inductance drops approxi- indicated with a * which are +/-30%. mately 30% at the stated ambient temperature. This current is determined by placing 6. Parts shown in bold are standard catalog parts and are available through sample the compnent in the specified ambient environment and applying a short duration stock and distribution. Parts in lighter font are available but are not necessarily held pulse current (to eliminate self-heating effect) to the component. in sample stock or distribution and lead times may be longer. Please contact Pulse 3. The rated current is the DC current required to raise the component temperature by for availablity. approximately 40C. Take note that the components performanc varies depending 7. Both the PA and PM part numbers are AEC-Q200 qualified parts. The PM part numbers on the system condition. It is suggested that the component be tested at the system have full automotive IATF16949 certification. The PM part number dimensions are level, to verify the temperature rise of the component during system operation. 100% tested in production but do not necessarily meet a product capability index 4. The part temperature (ambient+temp rise) should not exceed 125C under worst (Cpk)> 1.33 and therefore may not strictly conform to PPAP. case operating conditions. Circuit design, PCB trace size and thickness, airflow and 8. Special Characteristics other cooling provisions all affect the part temperature. Part temperature should be Mechanical PA4343/PM4343 Final Layout SUGGESTED PAD LAYOUT Series Mechanical A B C D E F G H PA4343/PM4343 Footprint 1 14.0 Max 12.8 Max 6.5 Max (4.0) (8.9) (4.3) (3.1) (8.0) PA4343/PM4343 Footprint 2 14.0 Max 12.8 Max 6.5 Max (4.7) (8.9) (5.0) (3.1) (8.0) All Dimensions in mm. Power.PulseElectronics.com P770.L (08/20) 2