PA5001.561NLT Pulse

I A T F SMT Power Inductors High Current Composite Inductor - PA5001.XXXNLT and PM2201.XXXNLT POWER PRODUCTS Height: 2.1mm Max Footprint: 4.3mm x 4.3mm Max Current Rating: up to 38Apk Inductance Range: 0.10uH to 2.20uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise Available in Commercial (PA5001) and Automotive (PM2201) grades Electrical Specifications 25C, Operating Temperature Range -55C to +155C 3 2 Part Number DC Resistance Inductance Rated Saturation K Factor 100KHz, 0.1V Current Current for TYP. MAX. 6 Commerical Automotive Core Loss uH20% A m m A PA5001.101NLT PM2201.101NLT 0.10 18 2.2 2.42 33 947.4 PA5001.221NLT PM2201.221NLT 0.22 16.8 4.1 4.6 18.8 602.9 PA5001.361NLT PM2201.361NLT 0.36 14.5 5.6 6.3 15.0 442.1 PA5001.401NLT PM2201.401NLT 0.40 14 6.9 7.73 13.5 442.1 PA5001.471NLT PM2201.471NLT 0.47 12.5 7.8 8.58 13.0 - PA5001.561NLT PM2201.561NLT 0.56 12 8.4 9.3 12.6 349 PA5001.601NLT PM2201.601NLT 0.60 11.7 8.6 9.52 12.3 - PA5001.721NLT PM2201.721NLT 0.72 10.5 10.4 11.6 10.6 288.3 PA5001.102NLT PM2201.102NLT 1.00 9.6 13.3 14.6 8.8 245.6 PA5001.122NLT PM2201.122NLT 1.20 9 16.2 17.9 7.8 213.9 PA5001.152NLT PM2201.152NLT 1.50 7.6 21.0 23.5 7.4 189.5 PA5001.182NLT PM2201.182NLT 1.80 7 25.0 28 7.0 170 PA5001.222NLT PM2201.222NLT 2.20 5.6 35.2 38.7 6.0 - Notes: 1. Actual temperature of the component during system operation (ambient plus other cooling provisions all affect the part temperature. Part temperature should be temperature rise) must be within the standard operating range. verified in the end application. 2. The saturation current is the current at which the initial inductance is guaranteed 5. Parts shown in bold are standard catalog parts and are available through sample to drop by no more than 40%. The typical inductance at a specified current can be stock and distribution. Parts in lighter font are available but are not necessarily held found on the typical performance curves. in sample stock or distribution and lead times may be longer. Please contact Pulse 3. The rated current is the DC current required to raise the component temperature by for availablity. approximately 40C. Take note that the components performanc varies depending 6. The PM2201.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The on the system condition. It is suggested that the component be tested at the system mechanical dimensions are 100% tested in production but do not necessarily meet a level, to verify the temperature rise of the component during system operation. product capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP. 4. The part temperature (ambient+temp rise) should not exceed 155C under worst 7. Special Characteristics case operating conditions. Circuit design, PCB trace size and thickness, airflow and Power.PulseElectronics.com P806.C (07/20) 1 1 6 9 4 90 SMT Power Inductors High Current Composite Inductor - PA5001.XXXNLT and PM2201.XXXNLT POWER PRODUCTS Mechanical PA5001.XXXNLT and PM2201.XXXNLT D A C H E XXX 1R2 B F 16D/C02 FINAL LAYOUT SUGGESTED PAD LAYOUT Series Mechanical A B C D E F L G H 3.40.3 1.60.25 3.4 (REF) 1.4 (REF) 3.8 (REF) PA5001/PM2201 N/A 4.10.2 4.10.2 1.90.2 0.880.2 All Dimensions in mm. TAPE & REEL INFO Blank portions Chip cavity Blank portions K P1 200mm or more 400mm or more G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) QTY A G P W K PCS/REEL 1 0 PA5001/PM2201 330 12.4 8 12 2.3 3000 Typical Performance Curves 101NLT 221NLT 0.12 100 0.25 100 0.20 80 0.10 80 0.15 60 0.07 60 0.10 40 0.05 40 0.05 20 0.02 20 0.00 0 0.00 0 05 10 15 20 25 010203040 DC CURRENT(A) DC CURRENT(A) Power.PulseElectronics.com P806.C (07/20) 2 INDUCTANCE (uH) W TEMP. RISE( ) INDUCTANCE (uH) L A G TEMP. RISE( )