SMT Power Inductors Power Beads - PA5119.XXXNLT & PA5120.XXXNLT Series POWER PRODUCTS Compatible with Picor Cool-Power Current Rating: Over 42Apk Inductance Range: 0.42uH to 1.5uH Height: 5.0mm Max (PA5119) and 6.9mm Max (PA5120) Footprint: 12.7mm x 10.2mm Max (PA5119) 17.8mm x 14.4mm Max (PA5120) 7 Electrical Specifications 25C Operating Temperature -40C to +130C 5 1 2 Saturation Current Inductance 3 4 Inductance 6 Part Irated DCR Heating Current (A TYP) 0ADC Irated Number (ADC) (m 10%) (A TYP) (uH 10%) (uH TYP) 25C 125C PA5119 Series (12.7 x 10.2 x 5.0mm Max) PA5119.421NLT 0.42 0.42 16 3.15 42 38 16 PA5119.901NLT 0.90 0.90 14 4.60 28 25 14 PA5119.152NLT 1.50 1.50 12 6.00 21 20 12 PA5120 Series (17.8 x 14.4 x 6.9 mm Max) PA5120.481NLT 0.48 0.48 32 1.7 55 47 32 NOTES: 1. Inductance measured at 100kHz, 100mVrms. environment and applying a short duration pulse current (to eliminate self-heating 2. Inductance at Irated is the value of the inductance at 25C at the listed rated current. effects) to the component. 3. The rated current as listed is either the saturation current (25C or 125C) or the heat- 6. The heating current is the DC current which causes the part temperature to increase ing current depending on which value is lower. by approximately 40C when used in a typical application. 4. The nominal DCR is measured from point to point , as shown below on the 7. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to mechanical drawing. industry standard tape and reel specification EIA-481. 5. The saturation current is the typical current which causes the inductance to drop 8. The temperature of the component (ambient plus temperature rise) must be within by 5% (for PA5119) and 2% (for PA5120) at the stated ambient temperatures (25C, the stated operating temperature range. 125C). This current is determined by placing the component in the specified ambient Mechanical Schematic PA5119.XXXHLT/PA5120.XXXHLT 3.7 7.2 45.4 2.7 2.4 5.4 9.0 2.0 2.0 2.9 3.0 Weight: PA5119 - 3.5grms PA5120 - 6.7grms Tape & Reel: PA5119 - 650 reel PA5120 - 300 reel Dimensions: mm Unless otherwise specified , all tolerances are 0.25 Power.PulseElectronics.com P894.A (04/20) 1SMT Power Inductors Power Beads - PA5119.XXXNLT & PA5120.XXXNLT Series POWER PRODUCTS PA5119.421NLT, LvsI, 25C and 125C 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 10 20 30 40 50 60 70 Current (A) .421NLT 25C .421NLT 125C PA5119.901NLT, LvsI, 25C and 125C 1.00 0.90 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0.00 0 5 10 15 20 25 30 35 40 Current (A) .901NLT 25C .901NLT 125C Power.PulseElectronics.com P894.A (04/20) 2 Inductance (uH) Inductance (uH)