SMT Power Inductor High Current Molded Power Inductor - PA5405 & PM5405 Series Height: 3.5mm Max Footprint: 14mm x 12.8mm Max Current Rating: up to 24A Inductance Range: 1 to 47uH High current, low DCR, and high efficiency Shielded construction and compact design Minimized acoustic noise and minimized leakage flux noise 200 Vdc Isolation Between Terminal and Core Available in Commercial (PA) and Automotive (PM) grades Electrical Specifications 25C - Operating Temperature -55C to +125C 3 2 Rated DC Saturation 5 Inductance Current Resistance Current 6,7 6,7 100KHz, 1.0V Commercial Automotive TYP. TYP. MAX. TYP. uH20% A m m A PA5405.102NLT PM5405.102NLT 1.0 24 2.7 3.5 40 PA5405.122NLT PM5405.122NLT 1.2 21 4 5 37 PA5405.152NLT PM5405.152NLT 1.5 19 4.8 5.5 35 PA5405.182NLT PM5405.182NLT 1.8 17 5.2 7 30 PA5405.222NLT PM5405.222NLT 2.2 16 6.3 8 29 PA5405.332NLT PM5405.332NLT 3.3 12 11 13.5 27 PA5405.472NLT PM5405.472NLT 4.7 10 15.3 18.5 24 PA5405.562NLT PM5405.562NLT 5.6 9.5 18 22 19 PA5405.682NLT PM5405.682NLT 6.8 9 20 24 18 PA5405.822NLT PM5405.822NLT 8.2 8.5 23 28 16 PA5405.103NLT PM5405.103NLT 10 7.5 29 34 14 PA5405.153NLT PM5405.153NLT 15 6.5 55 65 10 PA5405.223NLT PM5405.223NLT 22 4.5 83 99 7 PA5405.333NLT PM5405.333NLT 33 3.5 132 160 6 PA5405.473NLT PM5405.473NLT 47 3 181 218 5.5 Power.PulseElectronics.com P878. B (09/20) 1SMT Power Inductor High Current Molded Power Inductor - PA5405 & PM5405 Series Notes: 1. Actual temperature of the component during system operation (ambient plus 5. Please note that the inductance tolerance of all parts are 20%, except those temperature rise) must be within the standard operating range. indicated by an * which are +/- 30%. 2. The saturation current is the current at which the initial inductance drops 6. Parts shown in bold are standard catalog parts and are available through sample approximately 30% at the stated ambient temperature. This current is determined stock and distribution. Parts in lighter font are available but are not necessarily held by placing the compnent in the specified ambient environment and applying a short in sample stock or distribution and lead times may be longer. Please contact Pulse for duration pulse current (to eliminate self-heating effect) to the component. availablity. 3. The rated current is the DC current required to raise the component temperature by 7. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949 approximately 40C. Take note that the components performance varies depending certification. The mechanical dimensions are 100% tested in production but do not on the system condition. It is suggested that the component be tested at the system necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly level, to verify the temperature rise of the component during system operation. conform to PPAP. 4. The part temperature (ambient+temp rise) should not exceed 125C under worst 8. Special characteristics case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Mechanical PA5405/PM5405 A C L D XXXNL D/C G SUGGESTED PAD LAYOUT FINAL LAYOUT Series A B C D E L G H PA5405/PM5405 13.5+/-0.5 12.5+/-0.3 3.3+/-0.2 2.3+/-0.3 4.7+/-0.3 14.2 8 5 All Dimensions in mm. Power.PulseElectronics.com P878. B (09/20) 2 B E H