I A T F SMT Power Inductor High Current Composite Inductor - PA5430.XXXNLT and PM5430.XXXNLT Height: 3.1mm Max Footprint: 4.35mm x 4.35mm Max Current Rating: up to 6.6Apk Inductance Range: 3.3uH to 6.8uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise Available in Commercial (PA5430) and Automotive (PM5430) grades Electrical Specifications 25C, Operating Temperature Range -55C to +155C 3 Inductance Rated 2 Part Number DC Resistance Isat SRF 100KHz, 0.1V Current 6 Commerical Automotive uH20% A m MAX. A MAX MHz PA5430.332NLT PM5430.332NLT 3.3 6.6 28.6 5.5 43 PA5430.472NLT PM5430.472NLT 4.7 5.1 44.1 4.5 36 PA5430.682NLT PM5430.682NLT 6.8 3.9 74.1 3.6 29 Notes: 1. Actual temperature of the component during system operation (ambient plus verified in the end application. temperature rise) must be within the standard operating range. 5. Parts shown in bold are standard catalog parts and are available through sample 2. The saturation current is the current at which the initial inductance is guaranteed to stock and distribution. Parts in lighter font are available but are not necessarily held drop by no more than 40%. in sample stock or distribution and lead times may be longer. Please contact Pulse 3. The rated current is the DC current required to raise the component temperature by for availablity. approximately 40C. Take note that the components performanc varies depending 6. The PM5430.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The on the system condition. It is suggested that the component be tested at the system inductance and mechanical dimensions are 100% tested in production but do not level, to verify the temperature rise of the component during system operation. necessarily meet a product capability index (Cpk) >1.33 and therefore may not strictly 4. The part temperature (ambient+temp rise) should not exceed 155C under worst conform to PPAP. case operating conditions. Circuit design, PCB trace size and thickness, airflow and 7. Special Characteristics other cooling provisions all affect the part temperature. Part temperature should be PulseElectronics.com P900.A (01/21) 1 1 6 9 4 9SMT Power Inductor High Current Composite Inductor - PA5430.XXXNLT and PM5430.XXXNLT Mechanical PA5430/PM5430.XXXNLT and PA5431.XXXNLT D A C H E XXXNL 1R2 B F 16D/C02 FINAL LAYOUT SUGGESTED PAD LAYOUT Series A B C D E F L G H 3.40.3 1.60.3 3.4 (REF) 1.4 (REF) 3.8 (REF) 4.10.25 4.10.25 2.80.3 0.880.3 PA5430/PM5430 All Dimensions in mm. TAPE & REEL INFO SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) QTY Series A G P W K PCS/REEL 1 0 PA5430/PM5430 330 12.4 8 12 3.3 2000 For More Information: Americas - prodinfo power pulseelectronics.com Europe - power-apps-europe pulseelectronics.com Asia - power-apps-asia pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 2020. Pulse Electronics, Inc. All rights reserved. PulseElectronics.com P900.A (01/21) 2 L G