SMT Power Inductors Unshielded Drum Core - PF0504NL Series Height: 11.43 Max Footprint: 18.54mm x 15.24mm Max Current Rating: up to 20A Inductance Range: 0.68H to 150H 260C reflow peak temperature qualified Leaded technology compatible 6 Electrical Specifications 25C - Operating Temperature -40C to +125C 1 3 4 Inductance Inductance Saturation Current Heating Current 2 5 Part Irated Irated DCR (MAX) 0ADC ISAT IDC Number (H 15%) (A) (m) (H 20%) (A) (A) PF0504.681NL 0.68 20.0 2.0 0.68 64 20.0 PF0504.122NL 1.2 17.1 2.6 1.2 48 17.7 PF0504.222NL 2.2 14.7 3.7 2.2 35 14.7 PF0504.332NL 3.3 13.7 4.3 3.3 29 13.7 PF0504.392NL 3.9 11.7 6.7 3.9 26 11.7 PF0504.472NL 4.7 10.8 6.9 4.7 24 10.8 PF0504.682NL 6.8 9.0 9.8 6.8 20 9.0 PF0504.103NL 10 7.1 15 10 16 7.1 PF0504.183NL 18 6.0 25 18 13 6.0 PF0504.223NL 22 5.4 27 22 11 5.4 PF0504.333NL 33 4.4 42 33 9 4.4 PF0504.403NL 40 4.0 50 40 8 4.0 PF0504.473NL 47 3.5 55 47 7 3.5 PF0504.104NL 100 2.3 153 100 5 2.3 PF0504.154NL 150 2 200 150 4 2 Mechanical Schematic PF0504.XXXNL Weight .....................6.0 grams Tape & Reel ................160/reel Inches Dimensions: mm Unless otherwise specified, .004 all tolerances are 0,10 1 power.pulseelectronics.com SPM2007 12 (02/19) SMT Power Inductors Unshielded Drum Core - PF0504NL Series Notes from Tables: 1. Inductance at Irated is a typical inductance value measured when the inductor 4. The heating current, IDC, is the DC current required to raise the component is subjected to the rated current. temperature by approximately 40C. The heating current is determined by 2. The rated current listed is the lower of the saturation current 25C or the mounting the component on a typical PCB and applying current for 30 heating current. minutes. 3. The saturation current, Isat, is the current at which the component inductance 5. Optional Tape & Reel packaging can be ordered by adding a T suffix to the drops by 20% (maximum) at an ambient temperature of 25C. This current is part number (i.e. PF0504.681NL becomes PF0504.681NLT). Pulse complies to determined by placing the component in the specified ambient environment industry standard tape and reel specification EIA481. and applying a short duration pulse current (to eliminate self-heating effects) 6. The temperature of the component (ambient plus temperature rise) must be to the component. within the stated operating temperature range. Inductance vs Current Characteristics For More Information Pulse Worldwide Headquarters Pulse Europe Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia 15255 Innovation Drive Ste 100 Pulse Electronics GmbH Pulse Electronics (ShenZhen) CO., LTD 3 Fraser Street 0428 1F., No.111 Xiyuan Road Room 2704/2705 San Diego, CA 92128 Am Rottland 12 D708, Shenzhen Academy of DUO Tower Zhongli District Super Ocean Finance Ctr. U.S.A. 58540 Meinerzhagen Aerospace Technology, Singapore 189352 Taoyuan City 32057 2067 Yan An Road West Germany The 10th Keji South Road, Taiwan (R.O.C) Shanghai 200336 Nanshan District, Shenzhen, China P.R. China 518057 Tel: 858 674 8100 Tel: 49 2354 777 100 Tel: 86 755 33966678 Tel: 65 6287 8998 Tel: 886 3 4356768 Tel: 86 21 62787060 Fax: 858 674 8262 Fax: 49 2354 777 168 Fax: 86 755 33966700 Fax: 65 6280 0080 Fax: 886 3 4356820 Fax: 86 2162786973 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 2 power.pulseelectronics.com SPM2007 12 (02/19)