((( 8 9: < SMT POWER INDUCTORS Unshielded Drum Core - PG0015NL Series Height: 5.55mm Max Footprint: 10.15mm x 9.15mm Max Current Rating: up to 2.6A Inductance Range: 10H to 820H 260C reflow peak temperature qualified 5 Electrical Specifications 25C Operating Temperature -40C to +125C 2 3 Saturation Heating Inductance 4 1 Part Irated DCR SRF 0Adc Current Isat Current IDC Number (A) (m MAX) (MHz TYP) (H 20%) (A) (A) PG0015.103NL 10 2.6 60 2.6 4.8 20 PG0015.123NL 12 2.45 70 2.45 4.5 19 PG0015.153NL 15 2.27 80 2.27 4.3 18 PG0015.183NL 18 2.15 90 2.15 4.1 16 PG0015.223NL 22 1.95 100 1.95 4.0 14 PG0015.273NL 27 1.76 110 1.76 3.7 12 PG0015.333NL 33 1.50 120 1.50 3.4 12 PG0015.393NL 39 1.37 140 1.37 3.2 10 PG0015.473NL 47 1.28 170 1.28 3.1 9.0 PG0015.563NL 56 1.17 190 1.17 3.0 8.1 PG0015.683NL 68 1.11 220 1.11 2.7 7.6 PG0015.823NL 82 1.00 250 1.00 2.4 6.8 PG0015.104NL 100 0.97 350 0.97 2.2 6.2 PG0015.124NL 120 0.89 400 0.89 1.9 5.0 PG0015.154NL 150 0.78 470 0.78 1.8 4.5 PG0015.184NL 180 0.72 630 0.72 1.5 4.5 PG0015.224NL 220 0.66 730 0.66 1.3 4.0 PG0015.274NL 270 0.57 970 0.57 1.2 3.6 PG0015.334NL 330 0.52 1150 0.52 1.1 3.1 PG0015.394NL 390 0.48 1300 0.48 1.1 2.8 PG0015.474NL 470 0.42 1480 0.42 1.0 2.6 PG0015.564NL 560 0.32 1900 0.32 0.9 2.2 PG0015.684NL 680 0.28 2250 0.28 0.9 2.2 PG0015.824NL 820 0.24 2550 0.24 0.5 2.0 Schematic Mechanical ) ** ) + + %& - , - . , , , , - , - , Weight ....................1.5 grams Tape & Reel...............600/reel , 5 Inches Dimensions: , 5 , , , mm Unless otherwise specified, .004 all tolerances are 0,10 3&*4 4* 0. 0 ** %& , USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 13 SPM2007 (11/07)SMT POWER INDUCTORS Unshielded Drum Core - PG0015NL Series 3. The heating current Idc is the dc current which causes the tem- Notes from Tables perature rise of the part to increase approximately 40C. This cur- 1. The rated current as listed is either the saturation current rent is determined by mounting the component on a typical appli- 25C or the heating current depending on which value is lower. cation PCB and applying the current to the device for 30 minutes. 2. The saturation current Isat is the current which causes the 4. Optional Tape and Reel packaging can be ordered by adding a inductance to drop by 10% Max at an ambient temperature of suffix to the part number (i.e. PG0015.103NL becomes 25C. This current is determined by placing the component in the PG0015.103NLT). Pulse complies to industry standard tape and specified ambient environment and applying a short duration reel specification EIA481. pulse current (to eliminate self-heating effects) to the component. 5. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Typical Inductance vs Current Characteristics USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 14 SPM2007 (11/07)