SMT Power Inductors Power Beads - PG2110.XXXHLT Series Current Rating: Over 75Apk Inductance Range: 100nH to 180nH Height: 8mm Max Footprint: 8mm x 5mm Max 7 Electrical Specifications 25C Operating Temperature - 40C to +130C 5 1 2 Saturation Current Inductance 3 4 Inductance 6 Part Irated DCR Heating Current (A TYP) 0ADC Irated Number (ADC) (m 10%) (A TYP) (nH +/- 15%) (nH TYP) 25C 100C PG2110.101HLT 100 53 75 60 PG2110.121HLT 120 53 61 49 0.22 53 PG2110.151HLT 150 105 50 50 40 PG2110.181HLT 180 126 41 41 32 NOTES: 1. Inductance measured at 100kHz, 100mVrms. 7. In high volt*time applications, additional heating in the component can occur due 2. Inductance at Irated is the value of the inductance at 25C at the listed rated current. to core losses in the inductor which may neccessitate derating the current in order 3. The rated current as listed is either the saturation current (25C or 100C) or the heat- to limit the temperature rise of the component. To determine the approximate total ing current depending on which value is lower. losses (or temperature rise) for a given application, the coreloss and temperature rise curves can be used. 4. The nominal DCR is measured at point 2. , as shown below on the mechanical 8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to drawing. industry standard tape and reel specification EIA-481. 5. The saturation current is the typical current which causes the inductance to drop by The tape and reel for this product has a width (W=24mm), pitch (Po=12mm) and depth 20% at the stated ambient temperatures (25C, 100C ). This current is determined by (Ko=8.1mm). Samples of these parts can be ordered by removing the HLT suffix and placing the component in the specified ambient environment and applying a short replacing with HL. duration pulse current (to eliminate self-heating effects) to the component. 9. The temperature of the component (ambient plus temperature rise) must be within 6. The heating current is the DC current which causes the part temperature to increase by the stated operating temperature range. approximately 40C when used in a typical application. Schematic Mechanical PG2110.XXXHLT 8.5 2.5 2.5 SUGGESTED LAND PATTERN 8.0 MAX 12 PG2110.XXXHL 5.0 MAX DATE CODE Co.O Weight: 2.74grms Tape & Reel: 500/Reel Dimensions: mm 8.0 MAX Unless otherwise specified, all tolerances are 0.25 d 0.10 2 SURFACES 2.0 REF 3.4 REF FINAL OUTLINE PulseElectronics.com P908.A (04/21) 1SMT Power Inductors Power Beads - PG2110.XXXHLT Series TAPE & REEL INFO SURFACE MOUNTING TYPE, REEL/TAPE LIST TAPE SIZE REEL SIZE (mm) QTY (mm) TYPE W 0.30 A0 0.1 B0 0.1 K0 0.1 PCS/REEL PG2110.XXXHLT 24.0 5.1 8.1 8.1 500 PulseElectronics.com P908.A (04/21) 2