SMT Power Inductors Power Beads - PGL6312XXXHLT Series Current Rating: Over 90Apk Inductance Range: 90nH to 150nH Height: 10.0mm Max Footprint: 6.5mm x 6.5mm Max 7 Electrical Specifications 25C Operating Temperature - 40C to +130C 5 1 2 Saturation Current Inductance Inductance 3 4 6 Part DCR Heating Current Irated (A TYP) 0ADC Irated Number (ADC) (m nominal) (A TYP) (nH +/- 15%) (nH TYP) 25C 100C PGL6312.900HLT 90 90 68 90 77 PGL6312.101HLT 100 68 68 80 70 0.17 +/- 10% 70 PGL6312.121HLT 120 82 82 69 60 PGL6312.151HLT 150 102 52 52 46 NOTES: 1. Inductance measured at 100kHz, 100mVrms. 7. In high volt*time applications, additional heating in the component can occur due 2. Inductance at Irated is the value of the inductance at 25C at the listed rated current. to core losses in the inductor which may neccessitate derating the current in order 3. The rated current as listed is either the saturation current (25C or 100C) or the heat- to limit the temperature rise of the component. To determine the approximate total ing current depending on which value is lower. losses (or temperature rise) for a given application, the coreloss and temperature rise curves can be used. 2. 4. The nominal DCR is measured at point , as shown below on the mechanical 8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to drawing. industry standard tape and reel specification EIA-481. 5. The saturation current is the typical current which causes the inductance to drop by The tape and reel for this product has a width (W=16mm), pitch (Po=12mm) and depth 20% at the stated ambient temperatures (25C, 100C ). This current is determined by (Ko=6.8mm). Samples of these parts can be ordered by removing the HLT suffix and placing the component in the specified ambient environment and applying a short replacing with HL. duration pulse current (to eliminate self-heating effects) to the component. 9. The temperature of the component (ambient plus temperature rise) must be within 6. The heating current is the DC current which causes the part temperature to increase by the stated operating temperature range. approximately 40C when used in a typical application. 10. Sample Value only. Guaranteed by Design and not tested in production Schematic Mechanical PGL6312.XXXHLT 6.5 MAX 6.5 MAX .XXXHL 10.0 MAX 12 Weight: 2.74grms 0.10 2 SURFACES DCR MEASURE POINT Tape &Reel: 400/ Reel Dimensions: mm 2.6 Unless otherwise specified , 3.70 0.2 4.2 all tolerances are 0.25 6.6 2.75 REF 1.75 REF REFERENCE PAD LAYOUT P912.B (11/21) PulseElectronics.com 1.XXXHL SMT Power Inductors Power Beads - PGL6312XXXHLT Series TAPE & REEL INFO P1 PIN CIRCULAR HOLES INDICATOR W SURFACE MOUNTING TYPE, REEL/TAPE LIST USER DIRECTION OF FEED TAPE SIZE REEL SIZE (mm) QTY (mm) TYPE W 0.30 P1 0.1 K0 0.1 PCS/REEL PGL6312.XXXHLT 16.0 12.0 10.1 400 PGL6312.XXXHLT, L vs I, Curve 25C P912.B (11/21) PulseElectronics.com 2