PH0810CNL Pulse

HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS PH08XXCNL Series (up to 160W) Power Rating: up to 160 W Height: 9.1mm to 10.1mm Max Footprint: 24.7mm x 21.6mm Max Frequency Range: 200kHz to 700kHz Isolation (Primary to Secondary): 1500 VDC Patented: US Pat 9378885 Electrical Specifications 25C - Operating Temperature -40C to +125C Turns Primary Leakage DCR (m MAX) Maximum Part Schematic Inductance Inductance Height Number Primary A Primary B Secondary ( MIN) ( MAX) Primary A Primary B Secondary (mm) PH0801CNL 4T 4T 153 0.45 8.5 8.5 PH0802CNL 4T 5T 4T 194 0.45 8.5 12.5 9.1 (1T:1T:1T:1T) A1 PH0803CNL 5T 5T 240 0.55 12.5 12.5 7 PH0804CNL 5T 6T 290 0.60 12.5 14.2 9.6 PH0805CNL 6T 6T 345 0.65 14.2 14.2 PH0806CNL 4T 4T 153 0.45 8.5 8.5 PH0807CNL 4T 5T 194 0.55 8.5 12.5 9.1 1T & 1T A2 PH0808CNL 5T 5T 240 0.55 12.5 12.5 1.0 & 1.0 PH0809CNL 5T 6T 290 0.90 12.5 14.2 9.6 PH0810CNL 6T 6T 345 1.00 14.2 14.2 PH0811CNL 4T 4T 153 0.45 8.5 8.5 9.1 PH0812CNL 4T 5T 194 0.45 8.5 12.5 2T & 1T A3 PH0813CNL 5T 5T 240 0.55 12.5 12.5 1.75 & 1.75 9.6 PH0814CNL 5T 6T 290 0.65 12.5 14.2 PH0815CNL 6T 6T 345 0.85 14.2 14.2 10.1 Mechanicals PH08XXCNL SEE TABLE FOR HEIGHT Weight ......................11.8 grams Tape & Reel ..................180/reel Tray ...............................40/tray Inches Dimensions: mm PART NUMBER Unless otherwise specified, .010 all tolerances are 0.25 HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS PH08XXCNL Series (up to 160W) Schematics PH08XXCNL Tape & Reel Layout for PH08XXCNL A1 A2 A3 Notes: extension .xxx. For example, to add a 4T aux. winding to the base part number 1. Inductance is measured with both primary windings connected in services (2 to 5, PH0801CNL, use the part number PH0801.004CNL. The height increases to 10.1mm MAX with 3 and 4 shorted). for PH0810.xxxCNL. For the other part numbers there is no change to the height.. 2. Leakage inductance is measured on winding (2-5) with (3-4) and (7, 8, 9, 10, 11) 5. Optional Tape & Reel packaging can be ordered by adding a T suffix to the shorted. complete number (i.e. PH0801.009CNL becomes PHO0801.009CNLT). 3. The NL suffix indicates an RoHS-compliant part number. 6. To determine if the transformer is suitable for your application, it is necessary to 4. It is possible to add a primary side aux.winding to any of the above configurations ensure that the temperature rise of the component (ambient plus temperature rise) as shown in the schematics. Transformers with primary side aux. winding are non- not exceed its operating temperature. To determine the approximate temperature rise standard and can be made available upon request. The primary aux. winding can be of the transformer, refer to the graphs below. between 2 and 16 turns. To add a primary aux. winding to a given base, use the