PL259 Pulse

Cable Mounts and Connectors YOUR INTRODUCTION TO PULSELARSEN CABLE MOUNTS. Want to learn more Visit our website at pulselarsenantennas.comAll Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert from low frequency applications to high frequency applications and back by pulling or replacing the center pin and insulator. NMOHF mounts require a 3/4 hole for mounting and include 17 of coax. NMOHF mounts accommodate roof surfaces from 0.1 to .03 . NMOHFTHK (thick) mounts accommodates roof surfaces up to 1/2 thick. NMO HIGH FREQUENCY MOUNTS NMO 3/4 HIGH FREQUENCY MOUNTS Model Thickness Cable Model Coax Connector NMOHF 0761-2.54 mm Standard Not included NMOKHFCX CX (RG-58A/U) No Conn NMOHFMID 0.761 - 5.90 mm Mid-Thickness Not included NMOKHFCXFME CX (RG-58A/U) FME CRIMP NMOKHFCXMPL CX (RG-58A/U) MPL NMOHFTHK 1.6 - 12.7 mm Greatest Thickness Not included NMOKHFCXPL CX (RG-58A/U) PL-259 NMOKHFDS DS (RG-58A/U Dual Shield) No Conn NMOHF Mount Low Frequency Configuration NMOKHFUD UD (RG-58U Dual Shield) No Conn NMOKHFUDFME UD (RG-58U Dual Shield) FME All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert from low frequency applications to high frequency applications and back by pulling or replacing the center pin and insulator. NMOKHFUDMPL UD (RG-58U Dual Shield) MPL NMOKHFUDSMA UD (RG-58U Dual Shield) SMA NMOHF round magnetic mounts have the following specifications: NMOKHFUDTNC UD (RG-58U Dual Shield) TNC Size: 3.5 Diameter Cable Length: 12 Pull Strength: 80 lbs NMOKHF200SMAI LMR200 SMA Installed NMO HIGH FREQUENCY MAGNETIC MOUNTS NMO 3/4 HIGH FREQUENCY MID-SIZE MOUNTS Model Coax Connector NMOMMRNOCONN CX (RG-58A/U) No Conn Model Coax Connector NMOHF Thick Mount NMOHF Thick Mount Low Frequency NM0MMR CX (RG-58A/U) 58FCP NMOKHFMIDCX CX (RG-58A/U) No Conn High Frequency Configuration Configuration NMOMMRFME CX (RG-58A/U) FME Crimp DS (RG-58A/U Dual Shield, NMOKHFMIDDS No Conn Low Loss) NMOMMRPL CX (RG-58A/U) PL-259 NMOMMRMPL CX (RG-58A/U) MPL Crimp NMOKHFMIDUD UD (RG-58U, Dual Shield) No Conn NMOMMRTNC CX (RG-58A/U) TNC Crimp NMOMMRBNC CX (RG-58A/U) BNC Crimp NMO 3/4 HIGH FREQUENCY THICK MOUNTS NMOMMRN CX (RG-58A/U) N Crimp Model Coax Connector NMOMMRDS DS (RG-58A/U Dual Shield) No Conn NMOKHFCXTHK CX (RG-58A/U) No Conn NMOMMRDSFME DS (RG-58A/U Dual Shield) FME NMOKHFDSTHK DS (RG-58A/U Dual Shield) No Conn NMOMMRDSMPL DS (RG-58A/U Dual Shield) MPL Crimp NMOMMRDSN DS (RG-58A/U Dual Shield) N Crimp If your antenna has a tab or pin connector, use the NMOHF mount in If your antenna has a high frequency (HF) connector, use the NMOMMRDSSMA DS (RG-58A/U Dual Shield) SMA the low frequency configuration - leave the center pin and insulator in place NMOHF mount as it arrives from the factory. in the high frequency configuration - remove the center pin and NMOMMRDSSMAR/P DS (RG-58A/U Dual Shield) SMARP insulator. NMOMMRDSPL DS (RG-58A/U Dual Shield) PL-259T NMOMMRDSTNC DS (RG-58A/U Dual Shield) TNC Tab Pin HF connector connector connector NMOMMT200NOCONN LMR200 No Conn NMOMMR200SMA LMR200 SMA NMOMMR200N LMR200 N NMO 3/4 standard mounts require a 3/4 hole for mounting and include 17 of coax. NMO 3/4 STANDARD MOUNTS Model Coax Connector NMO3/8 mounts have the following specifications: NMOKNOCONN CX (RG-58A/U) No Conn Mounting: 3/4 hole Mounting Surface: 0.15 to 0.22 thickness Cable Length: 17 NMOK CX (RG-58A/U) PL-259 NMOKFME CX (RG-58A/U) FME NMO 3/8 THICK MOUNTS NMOKMPL CX (RG-58A/U) MPL Crimp Model Coax Connector NMOKDS DS (RG-58A/U Dual Shield) No Conn NMOKCX38THK CX (RG-58A/U) No Conn NMOKDSFME DS (RG-58A/U Dual Shield) FME NMOKUD38THK DS (RG-58A/U Dual Shield) No Conn NMOKUD UD (RG-58U Dual Shield) No Conn NMOKUDFME UD (RG-58U Dual Shield) FME NMOKUDPL UD (RG-58U Dual Shield) PL-259T NMOKUDTNC UD (RG-58U Dual Shield) TNC NMOHF Mount High Frequency Configuration