Designed for Military/Aerospace applications Tape & Reel packaging available SMT POWER INDUCTORS Shielded Drum Core - PL95XX Series Height: 0.122 inches (3.1mm) Max Footprint: 0.256 inches x 0.256 inches (6.5mm x 6.5mm) Max Inductance Range: 2.15H to 85.39H Current Rating: up to 2.60A MSL: 1 Max Reflow Temp: 235C Storage Temp: -55C to +125C Electrical Specifications 25C Operating Temperature - 55C to +130C 3 4 Inductance 2 Inductance Saturation Heating DCR (m) Part Irated Irated 0ADC Current Current Numbers (A) TYP MAX (H TYP) (H) (A) 25C (A) PL9501 2.15 2.60 15.3 17.6 2.5* 2.60 3.45 PL9502 2.58 2.30 16.6 20.3 3.3* 2.30 3.31 PL9503 3.43 2.10 22.5 27.0 4.0* 2.10 2.84 PL9504 4.63 1.85 24.9 31.1 5.0* 1.85 2.70 PL9505 5.22 1.70 32.3 41.9 6.0* 1.70 2.37 PL9506 6.57 1.50 37.9 49.9 8.0* 1.50 2.19 PL9507 8.65 1.30 45 54 10 1.30 2.01 PL9508 9.78 1.20 59 72 12 1.20 1.76 PL9509 12.13 1.10 66 82 15 1.10 1.65 PL9510 15.23 1.05 88 102 18 1.05 1.44 PL9511 18.70 0.95 103 119 22 0.95 1.33 PL9512 21.54 0.85 114 146 27 0.85 1.26 PL9513 27.71 0.76 155 183 33 0.76 1.08 PL9514 33.57 0.68 193 210 39 0.68 0.97 PL9515 40.15 0.60 196 230 47 0.60 0.96 PL9516 49.68 0.55 248 305 56 0.55 0.86 PL9517 60.66 0.48 278 351 68 0.48 0.81 PL9518 74.71 0.45 323 419 82 0.45 0.75 PL9519 85.39 0.40 417 520 100 0.40 0.66 *Inductance at 0ADC tolerance on indicated part numbers is 30% tolerance is 20% on all other parts. Optional Tape & Reel packaging can be ordered by adding a T suffix to the part number (i.e. PL9501 becomes PL9501T). NOTES FROM TABLE: (See back page) Mechanical PL95XX .052 1,32 .164 4,16 .164 4,16 .268 6,80 NOTE: Pin 3 and Pin 4 are for mechanical connection only . 1 pulseelectronics.com M124.E (3/13)SMT POWER INDUCTORS Shielded Drum Core - PL95XX Series Notes from Tables 1. Temperature of the component (ambient plus temperature rise) must be within specified operating 4. The heating current is the DC current, which causes the temperature of the part to increase by temperature range. approximately 40C. This current is determined by extending the terminals of the component with 30mm length 28 gauge buss wires and applying the current to the device for 30 minutes. The tem- 2. The rated current as listed is either the saturation current or the heating current depending on which perature is measured by placing the thermocouple between the winding and the shield. value is lower. 5. In high volt*time applications, additional heating in the component can occur due to core losses in 3. The saturation current is the current which causes the inductance to drop to 75% of its initial induc- the inductor which may necessitate derating the current in order to limit the temperature rise of tance at zero bias. This current is determined by placing the component at room ambient (25C), the component. In order to determine the approximate total loss (or temperature rise) for a given and applying a short duration pulse current (to eliminate self-heating effects) to the component. application, both copper losses and core losses should be taken into account. Schematic Weight . 0 .6 grams Tape & Reel . 2200/reel Inches Dimensions: mm Unless otherwise specified, .010 all tolerances are 0,25 Inductance vs Current Characteristics For More Information Pulse North America Pulse Europe Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia Headquarters Einsteinstrasse 1 B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 Two Pearl Buck Court D-71083 Herrenberg Aerospace Technology Bldg. Super Ocean Finance Ctr. 03-02 Zhongyuan Road Bristol, PA 19007 Germany 10th Kejinan Road 2067 Yan An Road West PM Industrial Bldg. Zhongli City U.S.A. High-Tech Zone Shanghai 200336 Singapore 368363 Taoyuan County 320 Nanshan District China Taiwan R. O. C. Shenzen, PR China 518057 Tel: 886 3 4356768 Tel: 215 781 6400 Tel: 49 7032 7806 0 Tel: 86 755 33966678 Tel: 86 21 62787060 Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Fax: 215 781 6403 Fax: 49 7032 7806 135 Fax: 86 755 33966700 Fax: 86 2162786973 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 2011. Pulse Electronics, Inc. All rights reserved. 2 pulseelectronics.com M124.E (3/13)