PM4548.102NLT Pulse

I A T F SMT Power Inductors High Current Molded Power Inductor - PA4548.XXXNLT Series POWER PRODUCTS Height: 2.4mm Max Footprint: 7.3mm x 6.9mm Max Current Rating: up to 30A Inductance Range: 0.10uH to 22.0uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise 200 Vdc Isolation Between Terminal and Core Electrical Specifications 25C - Operating Temperature -55C to +125C 3 2 Rated DC Saturation 5 Inductance Current Resistance Current 100KHz, 1.0V 6,7 6,7 Commercial Automotive TYP. TYP. MAX. TYP. uH20% A m m A PA4548.101NLT PM4548.101NLT 0.10* 30 1.4 1.7 70 PA4548.151NLT PM4548.151NLT 0.15* 30 1.8 2.3 45 PA4548.201NLT PA4548.201NLT 0.20 23 1.9 2.8 40 PA4548.221NLT PM4548.221NLT 0.22 21 2 3.2 34 PA4548.331NLT PM4548.331NLT 0.33 18 3.6 4.4 30 PA4548.361NLT PA4548.361NLT 0.36 17 3.8 4.6 29 PA4548.471NLT PM4548.471NLT 0.47 15 4.8 5.1 26 PA4548.561NLT PM4548.561NLT 0.56 13 5.5 6.5 24 PA4548.601NLT PA4548.601NLT 0.60 13 5.7 6.9 22 PA4548.681NLT PM4548.681NLT 0.68 13 6.4 7.2 21 PA4548.821NLT PM4548.821NLT 0.82 11 8 9.5 17 PA4548.102NLT PM4548.102NLT 1.0 11 10.5 13.5 16 PA4548.152NLT PM4548.152NLT 1.5 9 17 20 15 PA4548.222NLT PM4548.222NLT 2.2 7 23 28 14 PA4548.332NLT PM4548.332NLT 3.3 6 34 39 10 PA4548.472NLT PM4548.472NLT 4.7 5.5 41 50 9 PA4548.562NLT PM4548.562NLT 5.6 5 56 62 8 PA4548.682NLT PM4548.682NLT 6.8 4 65 72 7 PA4548.822NLT PM4548.822NLT 8.2 3.6 81 95 6 PA4548.103NLT PM4548.103NLT 10 3.2 92 101 5 PA4548.153NLT PM4548.153NLT 15 2.5 150 180 3.5 PA4548.223NLT PM4548.223NLT 22 1.8 185 215 3 Power.PulseElectronics.com P825.I (07/20) 1 1 6 9 4 9Marking Marking SMT Power Inductors High Current Molded Power Inductor - PA4548.XXXNLT Series POWER PRODUCTS Notes: 1. Actual temperature of the component during system operation (ambient plus verified in the end application. temperature rise) must be within the standard operating range. 5. Please note that the inductance tolerance of all parts are +/-20% except those 2. The saturation current is the current at which the initial inductance drops approxi- indicated with a * which are +/-30%. mately 30% at the stated ambient temperature. This current is determined by placing 6. Parts shown in bold are standard catalog parts and are available through sample the compnent in the specified ambient environment and applying a short duration stock and distribution. Parts in lighter font are available but are not necessarily held pulse current (to eliminate self-heating effect) to the component. in sample stock or distribution and lead times may be longer. Please contact Pulse 3. The rated current is the DC current required to raise the component temperature by for availablity. approximately 40C. Take note that the components performance varies depending 7. The PA4548.XXXNLT and PM4548.XXXNLT are both AEC-Q200 qualified. The PM4548. on the system condition. It is suggested that the component be tested at the system XXXNLT part numbers are also IATF16949 certified. The mechanical dimensions are level, to verify the temperature rise of the component during system operation. 100% tested in production but do not necessarily meet a product capability index 4. The part temperature (ambient+temp rise) should not exceed 125C under worst (Cpk) 1.33 and therefore the PM4548.XXXNLT may not strictly conform to PPAP. case operating conditions. Circuit design, PCB trace size and thickness, airflow and 8. Special Characteristics other cooling provisions all affect the part temperature. Part temperature should be Mechanical PA4548/PM4548 A C D L XXXNL D/C G SUGGESTED PAD LAYOUT FINAL LAYOUT Series A B C D E L G H PA4548/PM4548 7.00.3 6.60.3 2.20.2 1.80.3 3.00.3 7.7 2.5 3.5 TAPE & REEL INFO W A K P 0 1 G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) QTY A G P W K PCS/REEL 1 0 Power.PulseElectronics.com P825.I (07/20) 2 B E H