SMT Power Inductor High Current Molded Power Inductor - PA5400 & PM5400 Series Height: 1.2mm Max Footprint: 3.7mm x 3.4mm Max Current Rating: up to 10A Inductance Range: 0.15 to 10uH High current, low DCR, and high efficiency Shielded Construction and compact design Minimized acoustic noise and minimized leakage flux noise 200 Vdc Isolation Between Terminal and Core Available in Commercial (PA) and Automotive (PM) grades Electrical Specifications 25C - Operating Temperature -55C to +125C 3 2 Rated DC Saturation 5 Inductance Current Resistance Current 6,7 6,7 (100KHz, 1.0V) Commercial Automotive TYP. TYP. MAX. TYP. uH20% A m m A PA5400.151NLT PM5400.151NLT 0.15* 10 9.6 11 14 PA5400.221NLT PM5400.221NLT 0.22 6.5 14 17 10 PA5400.331NLT PM5400.331NLT 0.33 6.2 16 20 9.2 PA5400.361NLT PM5400.361NLT 0.36 6 18.5 23 8.5 PA5400.471NLT PM5400.471NLT 0.47 5 25 30 7.2 PA5400.561NLT PM5400.561NLT 0.56 4.5 31 36 6.6 PA5400.681NLT PM5400.681NLT 0.68 4 34 40 6.1 PA5400.821NLT PM5400.821NLT 0.82 3.5 41 48 5.8 PA5400.102NLT PM5400.102NLT 1.0 3.3 50 60 5.5 PA5400.152NLT PM5400.152NLT 1.5 3 71 85 4 PA5400.222NLT PM5400.222NLT 2.2 2.7 98 115 3.4 PA5400.332NLT PM5400.332NLT 3.3 2 191 210 3.1 PA5400.472NLT PM5400.472NLT 4.7 1.6 266 293 2.8 PA5400.562NLT PM5400.562NLT 5.6 1.5 310 360 2.2 PA5400.682NLT PM5400.682NLT 6.8 1.4 360 400 2 PA5400.822NLT PM5400.822NLT 8.2 1.2 420 463 1.7 PA5400.103NLT PM5400.103NLT 10 1 498 550 1.4 Power.PulseElectronics.com P874. A (09/20) 1SMT Power Inductor High Current Molded Power Inductor - PA5400 & PM5400 Series Notes: 1. Actual temperature of the component during system operation (ambient plus 5. Please note that the inductance tolerance of all parts are 20%, except those temperature rise) must be within the standard operating range. indicated by an * which are +/- 30%. 2. The saturation current is the current at which the initial inductance drops 6. Parts shown in bold are standard catalog parts and are available through sample approximately 30% at the stated ambient temperature. This current is determined stock and distribution. Parts in lighter font are available but are not necessarily held by placing the compnent in the specified ambient environment and applying a short in sample stock or distribution and lead times may be longer. Please contact Pulse for duration pulse current (to eliminate self-heating effect) to the component. availablity. 3. The rated current is the DC current required to raise the component temperature by 7. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949 approximately 40C. Take note that the components performance varies depending certification. The mechanical dimensions are 100% tested in production but do not on the system condition. It is suggested that the component be tested at the system necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly level, to verify the temperature rise of the component during system operation. conform to PPAP. 4. The part temperature (ambient+temp rise) should not exceed 125C under worst 8. Special characteristics case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Mechanical PA5400/PM5400 A C L D XXXNL D/C G SUGGESTED PAD LAYOUT FINAL LAYOUT Series A B C D E L G H PA5400/PM5400 3.5+/-0.2 3.2+/-0.2 1+/-0.2 0.7+/-0.2 1.2+/-0.2 4.1 1.9 1.45 All Dimensions in mm. Power.PulseElectronics.com P874. A (09/20) 2 B E H