SMT Power Inductor High Current Molded Power Inductor - PA5402 & PM5402 Series Height: 2.2mm Max Footprint: 4.7mm x 4.31mm Max Current Rating: up to 12A Inductance Range: 0.1 to 22uH High current, low DCR, and high efficiency Shielded construction and compact design Minimized acoustic noise and minimized leakage flux noise 200 Vdc Isolation Between Terminal and Core Available in Commercial (PA) and Automotive (PM) grades Electrical Specifications 25C - Operating Temperature -55C to +125C 3 2 Rated DC Saturation 5 Inductance Current Resistance Current 6,7 6,7 100KHz, 1.0V Commercial Automotive TYP. TYP. MAX. TYP. uH20% A m m A PA5402.101NLT PM5402.101NLT 0.10* 12 3.2 4 35 PA5402.181NLT PM5402.181NLT 0.18* 13.5 4.6 5.4 28 PA5402.221NLT PM5402.221NLT 0.22* 13 6.6 7.3 24 PA5402.331NLT PM5402.331NLT 0.33 10 7.8 8.6 18 PA5402.471NLT PM5402.471NLT 0.47 8 11.2 14 12 PA5402.561NLT PM5402.561NLT 0.56 7.3 13.5 16 10 PA5402.681NLT PM5402.681NLT 0.68 7 16 19 10 PA5402.102NLT PM5402.102NLT 1.0 5 22 27 8.5 PA5402.122NLT PM5402.122NLT 1.2 4.8 25 30 7.8 PA5402.152NLT PM5402.152NLT 1.5 4.5 34.8 42 7 PA5402.222NLT PM5402.222NLT 2.2 4 51 61 6 PA5402.332NLT PM5402.332NLT 3.3 3.5 69 76 4 PA5402.472NLT PM5402.472NLT 4.7 2.6 95 105 3.5 PA5402.562NLT PM5402.562NLT 5.6 2.2 112 125 3 PA5402.682NLT PM5402.682NLT 6.8 2.1 150 172 2.8 PA5402.822NLT PM5402.822NLT 8.2 2 158 180 2.5 PA5402.103NLT PM5402.103NLT 10 1.8 215 243 2.3 PA5402.153NLT PM5402.153NLT 15 1.5 325 374 1.9 PA5402.223NLT PM5402.223NLT 22 1.2 470 500 1.4 Power.PulseElectronics.com P875. A (09/20) 1SMT Power Inductor High Current Molded Power Inductor - PA5402 & PM5402 Series Notes: 1. Actual temperature of the component during system operation (ambient plus 5. Please note that the inductance tolerance of all parts are 20%, except those temperature rise) must be within the standard operating range. indicated by an * which are +/- 30%. 2. The saturation current is the current at which the initial inductance drops 6. Parts shown in bold are standard catalog parts and are available through sample approximately 30% at the stated ambient temperature. This current is determined stock and distribution. Parts in lighter font are available but are not necessarily held by placing the compnent in the specified ambient environment and applying a short in sample stock or distribution and lead times may be longer. Please contact Pulse for duration pulse current (to eliminate self-heating effect) to the component. availablity. 3. The rated current is the DC current required to raise the component temperature by 7. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949 approximately 40C. Take note that the components performance varies depending certification. The mechanical dimensions are 100% tested in production but do not on the system condition. It is suggested that the component be tested at the system necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly level, to verify the temperature rise of the component during system operation. conform to PPAP. 4. The part temperature (ambient+temp rise) should not exceed 125C under worst 8. Special characteristics case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Mechanical PA5402/PM5402 A C L D XXXNL D/C G SUGGESTED PAD LAYOUT FINAL LAYOUT Series A B C D E L G H PA5402/PM5402 4.45+/-0.25 4.06+/-0.25 1.8+/-0.2 0.76+/-0.3 2.0+/-0.2 5.2 2.2 2.4 All Dimensions in mm. Power.PulseElectronics.com P875. A (09/20) 2 B E H