T1/E1/CEPT/ISDN-PRI INTERFACE MODULES Dual Surface Mount Transformer Modules, 1500 Vrms, Extended Temperature Range RoHS peak reflow temperature rating 245C Optimized for enhanced EMC performance Extended temperature range Dual SMT package contains transformers with common mode chokes on both transmit and receive channels Models matched to leading transceiver ICs Patented Interlock Base construction for high reliability UL1950 approved Electrical Specifications 25C RoHS Secondary 2 Turns Ratio L CW/W DCR Pri Package/ L Compliant OCL 25C Primary Pins (Pri:Sec 2%) (H MAX) (pF MAX) ( MAX) Schematic Part Number (mH MIN) 1 EXTENDED TEMPERATURE RANGE MODELS OPERATING TEMPERATURE -40C TO +85C T1212NL 1CT:1CT & 1CT:2CT 1.20 .60 35 .90 AN/1 1-3, 4-6 T1215NL 1CT:1.41CT & 1CT:1.41CT 1.20 .60 30 .70 AN/1 1-3, 4-6 T1217NL 1CT:2.42CT & 1CT:2.42CT 1.20 .60 25 .60 AN/1 1-3, 4-6 T1219NL 1CT:2.4CT & 1CT:1CT 1.20 .60 35 .90 AN/1 1-3, 4-6 1. Extended Temperature Range Models For extended temperature range transformers (-40C to +85C operating temperature range), OCL (Open Circuit Inductance) is specified at both -40C and +25C. At -40C, OCL is 600 H minimum. All other parameters are specified at +25C only. Standard temperature range is 0C to +70C. 2. Turns ratio is specified primary:secondary (CT = Center Tap). 3. Standard packaging for the surface mount package is anti-static tubes. Optional Tape & Reel packaging can be ordered by adding a T suffix to the part number, (i.e. T1212NLT). Mechanical Schematic AN Weight .4.0 grams Tape & Reel 250/reel Tube 30/tube Inches010 Dimensions: Unless otherwise specified, all tolerances are mm 0,25 USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 32181071 China 86 755 33966678 Taiwan 886 3 4643715 www.pulseeng.com 1 T660.C (10/09)T1/E1/CEPT/ISDN-PRI INTERFACE MODULES Dual Surface Mount Transformer Modules, 1500 Vrms, Extended Temperature Range Application Notes 1. ET Product All coils have an ET product of 10 V-sec minimum. 7. Surge Voltage Capability All transformers and chokes meet surge voltage tests according to the most stringent regulatory documents, when used with the 2. Flammability Materials used in these products are recognized as proper voltage and current suppression devices: UL94-VO approved. Products meet the requirements of IEC 695-2-2 (Needle Flame Test). Metallic Voltage: 800 V peak, 10/560 sec Longitudinal Voltage: 2,400 V peak, 10/700 sec 3. Balance Characteristics The transformers meet the requirements for longitudinal balance of FCC part 68. 8. Isolation Voltage 100% of transformers are tested during production to the specified isolation voltage level. 4. Common Mode Rejection Ratio the CMRR for all transformers is better than 50 dB at 1 MHz. 9. General Information The transformers are specifically designed for use in 1.544 Mbps (T1), 2.048 Mbps (CEPT) and ISDN Primary Rate Interface (PRI) 5. Crosstalk Attenuation In the packages which contain transmit applications. They are matched to the majority of the line interface transceiver and receive transformers side by side, sufficient crosstalk attenuation ICs currently available. Use of the proper transformer allows the interface circuit is achieved by the inherent characteristics of the toroid cores as well to comply with ITU-T G.703 and other standards regarding pulse waveform, as by their proper positioning. The crosstalk attenuation is typically return loss, and balance. 65 dB or better. 10. Transformer Selection Guide Please contact Pulse Application Engineering 6. Return Loss ITU-T G.703 and the European national regulatory or see our website for the latest Pulse Transformer Selection Guide. documents specify minimum return loss levels. The transformers will allow these limits to be complied within the situations where they are applicable. Frequency 50-100 KHz 100 KHz-2 MHz 2-3 MHz Return Loss XMIT 9 dB 15 dB 11 dB RCV 12 dB 18 dB 14 dB For More Information: Pulse Worldwide Pulse Europe Pulse North China Pulse South Pulse China Headquarters Pulse North Asia Headquarters Einsteinstrasse 1 Room 2704/2705 Asia B402, Shenzhen Academy of 3F, No. 198 135 Joo Seng Rd. 12220 World Trade Dr. D-71083 Herrenberg Aerospace Technology Bldg. Super Ocean Finance Ctr. Zhongyuan Rd. 03-02 San Diego, CA 92128 Germany 10th Kejinan Rd. 2067 Yan An Rd. West Zhongli City PM Industrial Bldg. U.S.A. High-Tech Zone Shanghai 200336 Taoyuan County 320 Singapore 368363 China Nanshan District Taiwan R. O. C. www.pulseeng.com Shenzen, PR China 518057 Tel: 886 3 4356768 Tel: 65 6287 8998 Tel: 858 674 8100 Tel: 49 7032 7806 0 Tel: 86 755 33966678 Tel: 86 21 62787060 Fax: FRE 886 3 4356820 Fax: 65 6287 8998 Fax: 858 674 8262 Fax: 49 7032 7806 135 Fax: 86 755 33966700 Fax: 86 2162786973 Pulse: 886 3 4356823 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 2009. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 2 T660.C (10/09)