Z-BLOCKER Z-230PJ xDSL over POTS In-Line Filter Description The Z-230PJ is a small in-line filter designed to expedite the service delivery and improve the performance of digital subscriber line (DSL) and home phoneline network (HPN) services. This model filters all telephone sets, facsimile machines, answering machines, etc individually or in groups on line 1 only. Our in-line DSL filter design electronically isolates the high-speed DSL and HPN data streams from the voice band plain old telephone service (POTS). This design effectively blocks the Z-230PJ In-Line xDSL over POTS Filter DSL, and HPN up to 30 Megahertz. Features Applications l Isolates telephone equipment impedances from The Z-230PJ filters are used with other the xDSL and HPN systems Z-BLOCKER filters distributed throughout the subscribers premises to isolate all voice l Attenuates xDSL & HPN signals to phone equipment to prevent conversion to voice band equipment devices such as corded/cordless band signals telephones, answering machines, fax machines, 56Kb/s and lower rate modems, automatic l Attenuates xDSL & HPN signals to unbalanced dialers, recorder connectors and satellite phone equipment to prevent radiation into electronic equipment television set-top boxes. l Minimizes voice band interference, The Z-230PJ in-line DSL filter is one of many transmission, signaling and supervision filters manufactured by Excelsus for subscriber l Compatible with all major xDSL standards installed digital services within homes, offices, l RoHS Compliant and hotels. Excelsus is the number one selling brand of DSL filters worldwide. l Compliant and listed with UL 60950, FCC Part 68 l CE certified Z-230PJ Block Schematic 1 Networking.PulseElectronics.com Z-230PJ.A (03/19)Z-BLOCKER Z-230PJ xDSL over POTS In-Line Filter Z-BLOCKER Z-230PJ Filter Specifications Line side differential input blocking impedance At 20kHz >2k At 30kHz >3k From 5MHz to 10MHz >2k 1kHz insertion loss between 600W resistive Single filter <0.4 With 5 filters <0.6 1kHz/2.8kHz slope between 600W resistive Single filter <0.1 With 5 filters <1.1 DC resistance in Ohms Tip to Tip, and Ring to Ring <12 Tip to Ring >10M Longitudinal Balance per IEEE method From 200 - 1kHz >58dB From 1kHz - 3kHz >53dB Common mode rejection, 40kHz and 30MHz >45dB Low pass roll off (slope) between 600W and ADSL Transmission Unit - Remote >26dB Inter-Modulation Distortion First and Second order products >60dB Envelope Delay 300 Hz - 2800 Hz <100s 600W Return Loss into phone side with 600W line termination with ATU-R Single filter SRL Low >30dB ERL >14dB SRL High >17dB +2 bridged filters SRL Low >36dB ERL >23dB SRL High >13dB +4 bridged filters SRL Low >26dB ERL >15dB SRL High >8dB Complex* Return Loss with ATU-R Single filter SRL Low >27dB Single filter ERL >14dB Single filter SRL High >6dB + 2 bridged filters SRL Low >19dB ERL >14dB SRL High >3dB + 4 bridged filters SRL Low >15dB ERL >7dB SRL High >2dB *1330W in parallel with (100nfd in series with 348W) DC Loop Current - Meets specifications between 20 and 100 milliamps DC Connectors: RJ-11 Jack and RJ-11 Plug RJ11 pins have 50 micro-inches of gold plating Dimensions: Length = 2.12in (54mm), Width = 1.21in (30.85mm), Height = 0.72in (18.34mm), Cable length = 3.78in (96mm) +/-1.0 mm on outline dimension. +/-10.0 mm on length of cable Compliant and listed with UL / CSA 60950, FCC CFR 47 Part 68 For More Information: Americas - prodinfonetworkamericas pulseelectronics.com Europe - comms-Apps-Europe pulseelectronics.com Asia - prodinfonetworkapac pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 201 9. Pulse Electronics, Inc. All rights reserved. 2 Networking.PulseElectronics.com Z-230PJ.A (03/19)