W3213 PulseLarsen

1.575 GHz GPS Ceramic Patch Antenna Pulse Part Number W3213 Pulse is please to announce the W3213 GPS patch anten- na to compliment our growing range of tracking antenna products. This small 0.5 x .05 inch (13 x 13 mm) ceramic patch antenna is 0.16 inches (4 mm) high and has a pin- through mount. Double sided tape is on the underside of the antenna for adhesion to the customer board. Operating at 1.575 GHz, L1 GPS band, the W3213 patch provides circularly polarized radiation patterns to con- nect to satellite systems. Performance in this specifica- tion sheet is based on a ground plan of 1.2 x 1.2 inches (30 x 30 mm) delivering a gain of -1.5 dBic at Zenith and 10 degrees with 3dB axial ratio at Zenith. Increasing the size of the ground plane can significantly boost the actual application. Contact Pulse for applications sup- port to get the best performance from your Navigation systems. Solutions for Glonass bands and surface mount patch antennas are also available on request. Features - Small footprint - Right Hand Circular Polarization - GPS L1 Band - 1.575 GHz - RoHS Compliant Product Applications - Vehicle navigation and location - Personal hand held tracking systems - Healthcare and medical devices - Small portable tracking equipment GPS L1 Band Patch Antenna Typical performance (measured on 1.2 x 1.2 inch 30 x 30 mm FR-4 ground plane) Item Typical Performance Unit Center Frequency 1575.42 MHz Polarization Right Hand Circular RHCP Gain Zenith -1.5 dBic RHCP Gain 10 Elevation -1.5 dBic Axial Ratio Zenith 3 dB VSWR 1.6 Max Impedance 50 San Diego, CA 858 674 8100 Vancouver, WA 360 944 7551 Europe 49 7032 7806 0 Asia 86 755 33966678 North Asia 886 3 4356768 China 86 512 6807 9998 1 pulseelectronics.com/products/antennas L110.A (04/11)1.575 GHz GPS Ceramic Patch Antenna Pulse Part Number W3213 Mechanical Specifications 1 2 No. Item Description 1 Feed Pin Silver plated brass 2 Adhesive 0.13 mm thick double sided tape Notes: Feed pin manual soldering conditions: 300 C max soldering iron temperature, 5 seconds max Typical lead free solders are applicable Electrode silver metallization may tarnish if antenna is stored/used in corro- sive environment, especially where chloride, sulphur or sulfide, alkali or acid salts exist in the air. Corrosive gases may cause oxidation of electrodes and reduce solderability. NOTE: Ant ennas are delivered in trays (80 antennas per tray), 10 trays per shipping box (800 antennas per shipping box). 22 pulseelectrpulseelectronics.onics.ccom/om/prproducts/oducts/antantennasennas L110.A (04/11)