19 RACK MOUNT POWER SUPPLY PCO850/PDBC50/PDBC70 PCO850 PDBC50 PDBC70 PCO850/PDBC50/PDBC70 IMPORTANT SAFETY GUIDELINES: INTROUDCTION: *Please pay close attention to the important operating and Thank you for purchasing PYLE series 1 U Rack Mount Power maintenance instruction in this manual. Supply Conditioner, and congratulations on your choice. The *Read the instructions. Power Supply Conditioners feature excellent surge protection for *Keep and follow all the instructions. all your systems and they supply multiple outlets for your Heed all warnings. powering equipment. It not only protects anything plugged into *To prevent fire or electric shock, do not expose this equipment to them from spike and surges, but also has a built-in AC noise rain or moisture. Do not use this apparatus near water. filter to rid the system of radio frequency and electromagnetic *Clean the unit with a damp cloth only, Do not use solvents or interference. And this allows all your equipments to function abrasive cleaners. Never pour liquid on or into the unit. better and last longer. *Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including amplifiers) that produce heat. SAFETY INFORMATION: *Do not defeat the safety purpose of the polarized or To obtain best results from our Power Supply Conditioner Unit, groundingtype plug. A polarized plug has two blades with one please read the manual carefully before using. wider than the other. A grounding plug has two blades and round grounding prong. The wide blade or third prong is provided for WARINGS: your safety. If the provided plug does not fit your outlet, consult To reduce the risk of electrical shock, do not expose this equipment an electrician for the placement of the obsolete outlet. to rain or moisture. Dangerous high voltage is present inside the *Route the power cord and other cables so that they are not likely enclosure. Do not remove the covers. Refer servicing to qualified to be walked on, tripped over, or stressed. Pay particular attention personnel only. to the condition of the cords and cables at the plugs, and the point where the Power Supply Conditioners. To prevent risk of fire or CAUTION: injury, damaged cords and cables should be replaced immediately. These equipments shall be connected a 20 Ampere rated *Unplug the unit during lightning storms or when unused for long receptacle of the branch circuit. The total current drawn from periods of time the receptacles of these equipments is 15 Amperes maximum, *When wiring this unit and all other equipment used in connection to and no individual receptacle shall draw more than 12 Ampere. this unit make sure that all of your equipment it turned OFF 1 2