ePYXX114 (SMD) (3.5) PRELIMINARY TM 2 ezPyro I C Pyroelectric Infrared Gesture Sensor (SMD) Introduction The ezPyro range of thin film digital pyroelectric IR sensors for gesture recognition combines high quality sensors with a high level of configurable electronic integration in a small SMD package. High sensitivity combined with fast response times ensure rapid and accurate gesture detection. The detection range varies from 20 cm (no additional lens) to 80 cm (with plastic Fresnel lens). Programmable gain and filtering offer maximum flexibility in system design. Industry 2 standard I C communication enables plug-and-play connectivity to microcontrollers and allows easy tuning. These sensors offer various power saving modes, including a wake-up by gesture feature. Sensor Characteristics Electrical Characteristics Filter aperture d = 1.65 or 0.90 mm Supply voltage 1.75 to 3.6 V 2 Element size 0.64 x 0.64 mm Supply current (typ.) 1 to 65 A 2 SMD Package 5.65 x 3.7 x 1.55 mm Digital I/O I C (FM+ compatible) 1 8 D* (typ.) 5.5 x 10 cmHz/ W ADC 15bit ADC 1ksp 1 -10 NEP (typ.) 0.4 x 10 W/Hz Operating Temperature -40 to +85 C Time Constant ~10m s (10-20 Hz peak) Storage Temperature -40 to +110 C Field of View ~90 (1.65 mm aperture) Sensor read-out Current mode Gain / digital filtering / sampling rate / power Configurable modes 1) Measured without filter 500K, 10 Hz, room temperature Order Information Part Number Pixels Aperture Filter m Ordering Code Description ePYxxxxx-R7 ePY22114 2x2 1.65 mm 5.0 Long Pass 800 pcs on 7 tape and reel ePYxxxxx-R13 ePY21114 2x2 0.90 mm 5.0 Long Pass 4000 pcs on 13 tape and reel ePYxxxxx bulk ePYxxxxx-B1 Sensor on a breakout PCB For more information contact: sales pyreos.com Please note: the information contained in this document is subject to change without further notification. Pyreos reserves the right to alter the performance and any resulting specification. Pyreos may choose not to supply any engineering sample devices as a commercial product. No responsibility is accepted for any consequential loss incurred. Pyreos Ltd, SMC, Alexander Crum Brown Road, Edinburgh EH9 3FF, UK. Tel: +441316507009, www.pyreos.com 1 ePYXX114 (SMD) (3.5) PRELIMINARY Package Information Signal Filtering & Power Modes Fixed Analog Fixed Digital Max ADC Power Mode (base Digital Low Pass Filter High Pass Filter Analog (Hz) Low Pass Low Pass Sampling Rate sample rate) (Hz) Filter (Hz) Filter (Hz) (sps) Normal Power Mode Off 1 2 4 8 600 250 180 90 45 22.5 1000 Low Power Mode Off 0.17 0.33 0.66 1.3 100 42 30 15 7.5 3.75 166 Typical Current Consumption Mode Description (1.8 V, room temperature) Normal Power Mode Normal power consumption, 1 kHz max. sample rate 61 A Power consumption Low Power Mode Low power consumption, 166 Hz max. sample rate 7.5 A 2 Normal Operation Mode Sensor signal readout over I C 61 A Operational 21 A (Normal), 3.5 A (Low) Sleep Mode Hardware interrupt on infrared trigger state Power Down Mode Sensor is disabled 1.1 A Circuit Diagrams Single Device Block Diagram Three Devices with Synchronised Sampling Please note: the information contained in this document is subject to change without further notification. Pyreos reserves the right to alter the performance and any resulting specification. Pyreos may choose not to supply any engineering sample devices as a commercial product. No responsibility is accepted for any consequential loss incurred. Pyreos Ltd, SMC, Alexander Crum Brown Road, Edinburgh EH9 3FF, UK. Tel: +441316507009, www.pyreos.com 2