QX333A12.00000B15M Qantek

QX3 Series 2.5x3.2 SMD HCMOS Clock Oscillator Features Description Ultra-miniature 2.5 x 3.2 x 1.2mm package QX3 ultra-miniature oscillators consist of a TTL/ Frequency Range 1.000 to 75.000MHz HCMOS-compatible hybrid circuit and a min- Tristate (Enable/Disable) function as standard iature quartz crystal packaged in a low-pro le, Supply voltage 1.8, 2.5 or 3.3 Volts industry-standard ceramic package. General Speci cations Electrical Speci cations Frequency Range 1.000 to 75.000MHz Supply Voltage 1.8 Vdd 5% 2.5 Vdd 5% 3.3 Vdd 5% Output Logic HCMOS Input Current 1.000 to 32.000MHz 7mA 20mA 20mA Temperature Stability* 100ppm 32.100 to 50.000MHz 15mA 20mA 25mA 50ppm 50.100 to 60.000MHz 15mA 20mA 25mA 25ppm 60.100 to 75.000MHz 15mA 20mA 25mA 20ppm Output Voltage Logic High (Voh) 90% (80% at 1.8) Vdd min. Phase Jitter RMS <1ps typ. Logic Low (Vol) 10% (20% at 1.8) Vdd max. Aging per year 5ppm Output Standard 40 to 60% Symmetry Operating Temperature Standard -20 to +70C Tight 45 to 55% Range Industrial -40 to +85C Output Current Lol/Loh 2mA min. Extended -40 to +105C Output Load 15pF max. Automotive -40 to +125C Rise and Fall 1.000 to 32.000MHz 5ns max. 6ns max. 6ns max. Time Storage Temperature Range -55 to +125C 32.100 to 50.000MHz 3.5ns max. 6ns max. 6ns max. * Frequency stability is inclusive of calibration tolerance at 25C, frequency 50.100 to 60.000MHz 3.5ns max. 10ns max. 10ns max. change due to shock & vibration, 10% supply voltage variation and stability 60.100 to 75.000MHz 3.5ns max. 10ns max. 10ns max. over temperature range. Standby Current 10A max. Enable-Disable Function Tri-State Output Disable Time 300ns max. 150ns max. Output Enable Time 10ms max. 5ms max. Start Up Time 5 (10 at 1.8Vdd) ms max. Mechanical Dimensions 2.2 3.2 0.1 1.2 Ceramic Base Metal Lid 4 3 1 2 1 2 4 3 0.9 1.4 1.2 Max. Pin Connection: 1 E/D, 2 GND, 3 Output, 4 VDC Enable/Disable Function: E/D ( 1) Output ( 3), High (Open) Operating, Low High Impedance Part Numbering Guide Qantek Frequency Operating Tem- Automotive Load Tight Symmetry Package Supply Voltage Frequency Packaging Code Stability perature Range Indicator Capacitance Indicator Q = Qantek X3 = 2.5x3.2 18 = 1.8V A = 25ppm in MHz, always A = -20 to +70C A = AEC-Q200 15 = 15pF T = 45/55 R = Tape&Reel 25 = 2.5V B = 50ppm 8 digits including B = -40 to +85C M = Minireel (250pcs 33 = 3.3V C = 100ppm the decimal point C = -40 to +105C = Tape&Reel) D = 20ppm (f.ie. 20.00000) D = -40 to +125C Example: QX333B20.00000B15R bold letters = recommended standard speci cation QANTEK Technology Corporation Phone: +1 877-227-0440 (tollfree) www.qantek.com Fax: +1 877-227-0440 (tollfree) info qantek.com 2.5 0.1 1.0 0.65 1.6 1.0 QX3 Rev. 0.1QX3 Series 2.5x3.2 SMD HCMOS Clock Oscillator Tape and Reel Dimensions Marking Code Guide Contains frequency, Qantek manufacturing Code, production code (month and year), stability, temperature range and voltage indicator. Month Codes Year Codes Stability Temperature Range Voltage January A July G 2010 0 2011 1 2012 2 ppm PN Code C PN Code Volt PN Code February B August H 2013 3 2014 4 2015 5 20 D -20 to +70C A 1.8 1 25 A -40 to +85C B 2.5 2 March C September I April D October J 50 B -40 to +105C C 3.3 3 May E November K 100 C -40 to +125C D 5.0 5 June F December L custom S custom S custom S Example: First Line: 20.000 (Frequency) Second Line: QA1BB3 (Qantek January 2011 50ppm -40 to +85C 3.3V) Solder Re ow Pro le Environmental Speci cations Mechanical Shock MIL-STD-202, Method 213, C Vibration MIL-STD-202, Method 201 & 204 Thermal Cycle MIL-STD, Method 1010, B Gross Leak MIL-STD-202, Method 112 Fine Leak MIL-STD-202, Method 112 All speci cations are subject to change without notice. QANTEK Technology Corporation Phone: +1 877-227-0440 (tollfree) www.qantek.com Fax: +1 877-227-0440 (tollfree) info qantek.com QX3 Rev. 0.1