856073 RFMD + TriQuint = Qorvo 140 MHz SAW Filter Applications For broadband applications Product Features Functional Block Diagram Top view Gnd Gnd Gnd 8 7 6 Typical 3dB bandwidth of 44.0 MHz High attenuation Input 9 5 Gnd Single-ended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851943 (BW 3dB=44 MHz) Gnd 10 4 Hermetic Pb RoHS compliant (2002/95/EC), Pb-free 1 2 3 Gnd Gnd Gnd General Description Pin Configuration Pin SE Description The 856073 is a 140 MHz, SAW-based IF Filter. Its 4 Output High Selectivity makes it an excellent choice for a 5 Output return wide range of applications such as instrumentation, 9 Input test and measurement, terrestrial, microwave and 10 Input Return Network Infrastructure. 856073 has a single-ended 1,2,3,6,7,8 Case Ground input and output and comes in an industry standard hermetically sealed surface mount package that is Ordering Information RoHS compliant and Pb-free. Part No. Description 856073 Packaged Part 856073-EVB Evaluation Board Standard T/R size = 2,000 units/reel Advanced Data Sheet: Rev E 03-22-2016 Disclaimer: Subject to change without notice - 1 of 6- 2016 TriQuint Semiconductor, Inc. www.triquint.com / w ww . qorv o . co m 856073 RFMD + TriQuint = Qorvo 140 MHz SAW Filter Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to +85C Operable Temperature 0 to +70C (1) Electrical Specifications (2) Operating Temperature Range: 0 to +70C (3) Parameter Conditions Min Typical Max Units Center Frequency - - 140 - MHz Maximum Insertion Loss - - 21.75 22.5 dB (4) Lower 1 dB Bandedge - - 119.4 122.0 MHz Upper 1 dB Bandedge - 158.0 160.8 - (4) Lower 3 dB Bandedge - - 118.0 119.1 MHz Upper 3 dB Bandedge - 160.9 162.0 - (4) Lower 40 dB Bandedge - 112.95 113.6 - MHz Upper 40 dB Bandedge - 166.3 167.05 Amplitude Variation 122.0158.0 MHz - 0.5 1.5 dB p-p Phase Linearity 122.0158.0 MHz - 2.55 5.5 deg p-p Group Delay Variation 122.0158.0 MHz - 10.62 30 ns p-p Absolute Delay - - 0.768 - sec 10160 MHz 57 64 - dB (4) 60112 MHz 48 57 - dB Relative Attenuation 168250 MHz 43 56 - dB 250300 MHz 52 57 - dB (5) Nominal Impedance Single Ended - 50 - Notes: 1. All specifications are based on the TriQuint schematics for the reference designs shown on page 3. 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 4. All attenuation measurements are measured relative to minimum insertion loss 5. This is the optimum impedance in order to achieve the performance shown. Advanced Data Sheet: Rev E 03-22-2016 Disclaimer: Subject to change without notice - 2 of 6- 2016 TriQuint Semiconductor, Inc. www.triquint.com / w ww . qorv o . co m