QSEC110-14/5-01-QB200 Qualtek

END CAPS QSEC HEAT SHRINKABLE CABLE END CAPS, 1000V WITH SPIRAL ADHESIVE COATING Features/Applications QSEC offers an economical means of sealing the ends of power and control cables to ensure a watertight seal. The internal surface of the end caps has a layer of Recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths. Protects against oxidation, ozone, UV radiation, etc. Operating temperature: -55C to +110C, 1000V Minimum shrink temperature: 120C L Dw RoHS Compliant A Protection against oxidation, ozone & UV radiation D Ensures seal A-spiral hot melt adhesive Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55C to +110C Tensile Strength ASTM D 638 > 14 MPa Elongation at Break ASTM D 638 > 400% Density ASTM D 792 1.05 Elongation at Break After Aging 150C, 168 hrs. > 300% Dielectric Strength IEC 243 > 15kV/ mm 14 Volume Resistance IEC 93 > 10 .cm Product Dimensions As Supplied Standard Recovered (mm) For Cable (mm) Packaging Part Number Diameter *(QB) (mm) D (min) D (max) A (+ 10%) L (+ 10%) Dw (+ 5%) (Qty) Standard Length End Cap QSEC105-12/4-QB200 12 4 15 40 2.6 4-10 200 QSEC110-14/5-QB200 14 5 18 45 2.2 5-12 200 QSEC115-20/6-QB150 20 6 25 55 2.8 6-16 150 QSEC120-25/8.5-QB150 25 8.5 30 68 2.8 10-20 150 QSEC130-35/16-QB100 35 16 35 83 3.3 17-30 100 QSEC135-40/15-QB100 40 15 40 83 3.3 18-32 100 QSEC140-55/26-QB50 55 26 50 103 3.5 28-48 50 QSEC150-75/36-QB40 75 36 55 120 4.0 45-68 40 QSEC160-100/52-QB30 100 52 70 140 4.0 55-90 30 QSEC170-120/60-QB15 120 60 70 150 4.0 65-110 15 QSEC180-145/60-QB15 145 60 70 150 4.0 70-130 15 QSEC190-160/82-QB10 160 82 70 150 4.0 90-150 10 QSEC200-200/90-QB10 200 90 70 160 4.2 100-180 10 Extended Length End Cap QSEC110L-14/5-QB200 14 5 30 55 2.2 5-12 200 QSEC130L-42/15-QB100 42 15 40 110 3.3 18-34 100 QSEC140L-55/23-QB50 55 23 70 140 3.8 25-48 50 QSEC145L-62/23-QB50 62 23 70 140 3.8 25-55 50 QSEC150L-75/32-QB40 75 32 70 150 4.0 40-68 40 QSEC150XL-75/36-QB40 75 36 70 170 4.2 45-68 40 QSEC160L-105/45-QB30 105 45 65 150 4.0 50-90 30 Notes: 1. End cap with valve stem is available upon request. 2. * See Part Number Guide for standard packaging codes.. 3. Cross Reference Guide available. www.Qualtekusa.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Heat Shrink Cable Boots & End Caps category: Click to view products by Qualtek manufacturer: Other Similar products are found below : 577159N001 645494-000 CX4132-000 687025-000 705331-000 718446-000 725666N001 729257-000 F27131-000 F85868-000 770- 003S106W2 770-013210W1 770-013311 770-013312 806542N001 807507-000 808362-000 808618-000 809125-000 809130-000 809218- 000 812014-000 812047-000 813166-000 813767N002 814741-000 819117N001 823026-000 823070-000 825002-000 841189N001 861471-000 866647-000 879515-000 937577-000 957073-000 982033-2 A77813-000 R280576000 D96192-000 163549-000 EN3BOOTLKIT MTPSRBCL-C 1954015-1 200W531-3-0 202A163-4-0-CS5067 202A343-3-00-0 202B221-13-0 202B231-13-0 202B563-25-07-0