Build a Smarter World Quectel SC600T Multi-mode Smart LTE Module with Wi-Fi & Bluetooth SC600T is Quectels new generation of multi -mode Smart LTE Cat 6 module with built-in Android 9.0 OS. Based on Qualcomm TM octa-core 64-bit high-performance processors with built-in Adreno 506 GPU, SC600T is designed to support leading performance, various multimedia features and Quick Charge 3.0 technology. It is ideal for both industrial and consumer applications with high data -rate and multimedia functions. SC600T comes in four variants: SC600T -NA*, SC600T-EM*, SC600T-JP* and Wi-Fi & BT only version SC600T-WF*. SC600T supports multiple -input multiple -output (MIMO) technology. The use of multiple antennas at the receiver end at the same time and on the same frequency band greatly minimizes errors and optimizes the data speed. This module also combines high-speed wireless connectivity with embedded multi -constellation and high -sensitivity GNSS (GPS, GLONASS and BeiDou) receiver for positioning. A rich set of interfaces (such as LCM, Camera, Touch Panel, MIC, SPK, UART, USB, I2C, SPI) extend the applicability of the module to a wide range of M2M applications, including smart POS, smart cash registers, smart home gateways, smart robots, smart wearables, security surveillance, PDA & tablets, vending machines, delivery lockers, police and law enforcement equipment, in-car video streaming and entertainment systems, etc. Key Benefits LTE Cat 6 modem supporting 2x20MHz carrier aggregation, with ARM Cortex-A53 Qualcomm Android 9.0 TM maximum download speed up to 300Mbps 64-bit Processor Adreno 506 GPU (Octa-core) Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage Dual LCDs and dual touch panels for independent display and operation: 1920x1200 60fps for primary display and Smart LTE Cat 6 IEEE 802.11 BT4.2 (BR/EDR+BLE) 1920x1080 60fps for secondary display Max 300Mbps (DL) a/b/g/n/ac Max 50Mbps (UL) Support up to four cameras, with two of them working simultaneously Multi -constellation GNSS receiver available for applications GPS+GLONASS+ Powerful Multimedia requiring fast and accurate fixes in any environment LCC+LGA BeiDou Function Package Support recording and playback of 4k videos at 30fps Rev.: V1.1 Status: Released EMAIL US: info quectel.com VISIT US: www.quectel.com 43.0mm Quectel SC600T Multi-mode Smart LTE Module with Wi-Fi & Bluetooth 44.0mm 2.85mm Variant for EMEA/India/Korea/Taiwan/South LTE FDD B18: -101.2 LTE FDD B19: -100.7 Motor Drive: 1 Asia/Latin America/Australia/New Zealand LTE FDD B20: -100 LTE FDD B21: -99.7 Flash Driver: 2 SC600T-EM*: LTE FDD B25: -100.7 LTE FDD B26: -99.2 LED Sink: 4 LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28 LTE FDD B28: -99.2 LTE FDD B66: -99.4 Antenna: 4 Solder Pads for Main/Rx-diversity/ LTE TDD: B38/B39/B40/B41 LTE FDD B71: -99.3 LTE TDD B38: -99.2 GNSS/Wi-Fi & BT Antennas, Respecvti ely WCDMA: B1/B2/B4/B5/B8 LTE TDD B39: -99.2 LTE TDD B40: -99.2 GSM: 850/900/1800/1900MHz LTE TDD B41: -98.7 WCDMA B1: -109 Enhanced Features Variant for North America WCDMA B2: -109 WCDMA B4: -109.5 WLAN: SC600T-NA*: WCDMA B5: -110 WCDMA B6: -111 2.4G/5G, 802.11 a/b/g/n/ac LTE FDD: B2/B4/B5/B7/B12/B13/B14/B17/B25/ WCDMA B8: -110.5 WCDMA B19: -100.5 Bluetooth: B26/B66/B71 EGSM850: -108.3 EGSM900: -108.8 BT2.1+EDR/3.0/4.1 LE/4.2 BLE LTE TDD: B41 DCS1800: -108 PCS1900: -107 GNSS: GPS/GLONASS/BeiDou WCDMA: B2/B4/B5 Cat 6 Modem with 2x20MHz CA Variant for Japan Audio & Video Support Rx-diversity , DL MIMO 2 2 SC600T-JP*: VoLTE: Support 3GPP E-UTRA Release 10 LTE FDD: B1/B3/B5/B8/B11/B18/B19/B21/B26/ Crystal Clear VoLTE with Ultra HD Voice and Bandwidth: 1.4/3/5/10/15/20MHz B28 SRVCC/CSFB Built-in Charge IC & Fuel Gauge, LTE TDD: B41 High Fidelity Music Playback of 24-bit/192kHz Qualcomm Quick Charge 3.0 WCDMA: B1/B6/B8/B19 Video: Support Dual LCDs for Independent Display Variant for the Global Encode: Support Dual SIM Dual Standby SC600T-WF*: 3840x2160 30fps (HEVC/H.264) Firmware Upgrade via USB Interface Only Support Wi-Fi & BT 1080p 30fps (MPEG-4/VP8) 864x480 30fps (H.263) General Features Data Decode: OS: Android 9.0 LTE: 3840x2160 30fps (HEVC/H.264,VP8/VP9) Memory: Cat 6 FDD: Max 300Mbps (DL)/Max 50Mbps (UL) 1080p 60fps (VC-1/MPEG-4/) 16GB eMMC+2GB LPDDR3 (Default) Cat 6 TDD: Max 265Mbps (DL)/Max 35Mbps (UL) 1080p 30fps (DivX4.x/5.x/6.x,MPEG-2) 32GB eMMC+3GB LPDDR3 (Optional) UMTS: 864x480 30fps (H.263) 64GB eMMC+4GB LPDDR3 (Optional) DC-USDPA: Max 42Mbps (DL) 720x480 30fps (DivX3.11) Operating Temperature : -35C ~ +65C DC-HSUPA: Max 11.2Mbps (UL) Wi-Fi Display Supports up to 1080P at 30fps for Dimensions: 43.0mm 44.0mm 2.85mm WCDMA: Max 384Kbps (DL/UL) Encoding and Decoding Package: LCC+LGA Weight: Approx. 13.0g GSM: Interfaces GPRS: Max 107Kbps (DL)/85.6Kbps (UL) LCM: Approvals EDGE: Max 296Kbps (DL)/236.8Kbps (UL) 4-lane MIPI DSI0 + 4-lane MIPI DSI1 Carrier WUXGA (19201200) 60fps Electrical Characteristics Verizon*/AT&T*/T-Mobile*(North America) Camera: Supply Voltage: 3.55V~4.4V, 3.8V Typ. NTT DOCOMO*/KDDI* (Japan) 3 Groups of 4-lane MIPI CSI, up to 2.1Gbps/Lane Consumption: 70uA Power off Telstra (Australia) Support 3 or 4 Cameras 3.6mA Sleep, Typ. Regulatory: Up to 24MP with Dual ISPs Output Power: GCF* (Global) Touch Panel: Class 4 (33dBm2dB) for GSM850 CE* (Europe) Capacivti e Touch Panel Class 4 (33dBm2dB) for EGSM900 FCC*/PTCRB* (North America) Audio: Class 1 (30dBm2dB) for DCS1800 IC* (Canada) Speaker, Earpiece, Headphone, and 3 MICs for Class 1 (30dBm2dB) for PCS1900 JATE/TELEC (Japan) Analog Audio Class E2 (27dBm3dB) for GSM850 8-PSK RCM* (Australia/New Zealand) Support One Noise-canceling MIC Class E2 (27dBm3dB) for EGSM900 8-PSK Others: USB: Class E2 (26dBm3dB) for DCS1800 8-PSK RoHS Compliant Compliant with USB 3.0/2.0 , Support USB OTG Class E2 (26dBm3dB) for PCS1900 8-PSK I2C: 5 Class 3 (24dBm+1/-3dB) for WCDMA bands * Under Development (U)SIM: 2 (1.8V/2.95V) Class 3 (23dBm2dB) for LTE-FDD bands TBD UART: 4 (Support 4Mbps with Hardware Flow Class 3 (23dBm2dB) for LTE-TDD bands Control) Sensivti ity (dBm): SD Card: 1 (3.0, 4-bit SDIO) LTE FDD B1: -100.2 LTE FDD B2: -100.2 PWRKEY: 1.8V, Pulled-up Internally LTE FDD B3: -99.5 LTE FDD B4: -99 SPI: 2 (Can be Mulplti exed into UART and I2S LTE FDD B5: -100.7 LTE FDD B7: -98.7 Respecvti ely, and I2S Supports Both Tx and Rx ) LTE FDD B8: -101.5 LTE FDD B11: -99.5 ADC: 2 LTE FDD B12: -99.7 LTE FDD B13: -99.5 GPIO: 19 LTE FDD B14: -99.3 LTE FDD B17: -99.7 Copyright 2019 Quectel Wireless Solutions Co., Ltd. All Rights Reserved