Technical Data Sheet EZ-Lux CONNECTOR FOR LUXCIS ARINC 801 PAGE 1/4 ISSUE 2017-03-01 SERIES EZ-Lux PART NUMBER F725 E20 000 EZ-Lux SQUARE FLANGE RECEPTACLE without boot EZ-Lux was designed to be a compact, easy to mate, single channel solution for LuxCis ARINC 801 contacts. The push-pull coupling mechanism simplifies the connection, especially in blind mating conditions. FEATURES: Fast & easy to use with its push-pull locking system Single channel connector Small foot print Push pull coupling mechanism Compatible with LuxCis Arinc 801, Multimode, Singlemode PC and APC optical contact Suitable for fiber optic cable diameter from 1.7mm to 2mm Receptacle equipped with flange for an easy and secure panel mounting This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication in the effort to improve our products, we reserve the right to make any changes judged necessary. Technical Data Sheet EZ-Lux CONNECTOR FOR LUXCIS ARINC 801 PAGE 2/4 ISSUE 2017-03-01 SERIES EZ-Lux PART NUMBER F725 E20 000 CHARACTERISTICS OPTICAL CHARACTERISTICS WITH LUXCIS ARINC 801 CONTACT: LuxCis Arinc 801 contact Optical: Multimode PC Singlemode UPC Singlemode APC 850 / 1300 nm 1310/1550 nm 1310/1550 nm Insertion Loss (IL) Mean: 0.10 dB 0.15 dB 0.20 dB TIA/EIA-171 Return Loss (RL): > 20 dB > 50 dB > 60 dB TIA/EIA-455-107 CHARACTERISTICS: Qualification per Arinc 801 standard: Endurance : Mechanical: 100 matings* TIA/EIA 455-21A Cable retention : 68 N (cable dependent) EN2591-610 Temperature range : -55 C / +125 C (cable dependent) Environmental: Salt spray : 96 h Body : Brass. Plating : Nickel Material: Contact retention clip Beryllium copper Protective cap: Plastic Plug without LuxCis contact : 12.3 g approx. (W/O cap) Weight: * EZ-Lux has passed additional testing which demonstrates its suitability for 1,000 mating cycles. This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication in the effort to improve our products, we reserve the right to make any changes judged necessary.