R123312000 Radiall

TECHNICAL DATA SHEET 1 / 2 STRAIGHT BULKHEAD JACK CRIMP TYPE R123.312.000 CABLE 2.6/50S Series : QMA All dimensions are in mm . pn ao COMPONENTS MATERIALS PLATING (m) BODY BRASS BBR 2 CENTER CONTACT BERYLLIUM COPPER NPGR OUTER CONTACT - - INSULATOR PTFE GASKET - OTHERS PARTS BRASS BBR 2 - - - - - - Issue : 0923 C In the effort to improve our products, we reserve the right to make changes judged to be necessary. TECHNICAL DATA SHEET 2 / 2 STRAIGHT BULKHEAD JACK CRIMP TYPE R123.312.000 CABLE 2.6/50S Series : QMA PACKAGING SPECIFICATION Standard Unit Other 100 W option Contact us CABLE ASSEMBLY ELECTRICAL CHARACTERISTICS Stripping a b c d e f Impedance 50 2,80 6,50 11,0 0,00 8,20 0,00 mm Frequency 0-6 GHz VSWR 1.15 + 0,0200 x F(GHz) Maxi F(GHz) dB Maxi Insertion loss 0.05 Assembly instruction : Crimp 02 - F(GHz)) dB Maxi RF leakage - ( ***80 Voltage rating 250 Veff Maxi Recommended cable(s) Dielectric withstanding voltage 750 Veff mini RG 188 Insulation resistance 5000 M mini RG 316 KX 22A ECO 316 Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of MECHANICAL CHARACTERISTICS the cable may diminish the performance of the assembly Cable retention Center contact retention Axial force Mating end 18 N mini - pull off 90 N mini Axial force Opposite end 18 N mini - torque NA N.cm Torque NA N.cm mini TOOLING Part Number Description Hexagon Recommended torque Mating N.cm . Panel nut 160 N.cm R282.211.000 CRIMPING TOOL 3.25 Clamp nut N.cm R282.235.003 CRIMPING DIES 3.25 A/F clamp nut 0,0000 mm M22520/5-03 R282.281.000 CRIMPING TOOL 2x4 (pos. 5) Mating life 100 Cycles mini R282.293.000 CRIMPING TOOL Weight 5,0500 g M22520/5-01 R282.967.016 POSITIONER FOR CRIMPIMG TOOL ENVIRONMENTAL Operating temperature C -40/+105 Hermetic seal Atm.cm3/s NA OTHER CHARACTERISTICS Panel leakage NA **Intermod.:-120dBc at 1.8GHz (2x20W) ***RF Leakage interf only:3<F<6GHz:>70dB Issue : 0923 C In the effort to improve our products, we reserve the right to make changes judged to be necessary.