R164080030 Radiall

1 / 2 TECHNICAL DATA SHEET STRAIGHT PLUG CRIMP R164.080.030 CABLE 15/50S Series : QN All dimensions are in mm . pn ao MATERIALS PLATING (m) COMPONENTS BRASS BBR OVER SILVER BODY BRASS SILVER PASSIVATED OVER COPPER CENTER CONTACT BERYLLIUM COPPER NPGR OUTER CONTACT PTFE INSULATOR EPDM GASKET BRASS BBR OTHERS PARTS - - - - - - Issue : 1308 A In the effort to improve our products, we reserve the right to make changes judged to be necessary. This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from RADIALL 2 / 2 TECHNICAL DATA SHEET STRAIGHT PLUG CRIMP R164.080.030 CABLE 15/50S Series : QN PACKAGING SPECIFICATION Standard Unit Other 50 W option Contact us CABLE ASSEMBLY ELECTRICAL CHARACTERISTICS Stripping a b c d e f Impedance 50 4,50 12,0 18,0 0,00 13,5 0,00 mm Frequency 0-6 GHz VSWR TBD + 0,0000 x F(GHz) Maxi F(GHz) dB Maxi Insertion loss TBD Assembly instruction : Crimp 01 - F(GHz)) dB Maxi RF leakage - ( Voltage rating 1000 Veff Maxi Recommended cable(s) Dielectric withstanding voltage 2500 Veff mini AEP-600FR Insulation resistance 5000 M mini LMR 600 Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly Cable retention MECHANICAL CHARACTERISTICS - pull off N mini Center contact retention - torque N.cm Axial force Mating end 27 N mini Axial force Opposite end 27 N mini TOOLING Torque NA N.cm mini Part Number Description Hexagon R282.235.166 15.49 Recommended torque R282.293.000 CRIMPING TOOL Mating NA N.cm M22520/5-01 Panel nut NA N.cm Clamp nut NA N.cm A/F clamp nut 0,0000 mm OTHER CHARACTERISTICS Mating life 100 Cycles mini Weight 34,6100 g ENVIRONMENTAL Operating temperature C -55/+125 Hermetic seal Atm.cm3/s NA Panel leakage NA Issue : 1308 A In the effort to improve our products, we reserve the right to make changes judged to be necessary. This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from RADIALL