R180300007W Radiall

Technical Data Sheet BULKHEAD JACK SOLDER TYPE .141 PAGE 1/3 ISSUE 26-01-17A SERIES NEX10 PART NUMBER R180300007 All dimensions are in mm . pn ao COMPONENTS MATERIALS PLATING (m) Body BRASS. BBR Center contact BERYLLIUM COPPER SILVER Outer contact PTFE Insulator Gasket Others parts BRASS,BRONZE BBR - - - - - - This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary. Technical Data Sheet BULKHEAD JACK SOLDER TYPE .141 PAGE 2/3 ISSUE 26-01-17A SERIES NEX10 PART NUMBER R180300007 PACKAGING Standard Unit Other 50 Contact us Contact us ELECTRICAL CHARACTERISTICS ENVIRONMENTAL Impedance 50 Operating temperature -55~+125 C 0-18 Hermetic seal NA Atm.cm3/s Frequency GHz Panel leakage NA VSWR 1.02* + 0.0200 x F(GHz) Maxi Insertion loss 0.05 F(GHz) dB Maxi RF leakage - ( NA - F(GHz)) dB Maxi Voltage rating 500 Veff Maxi SPECIFICATION Dielectric withstanding voltage 1500 Veff mini Insulation resistance 5000 M mini MECHANICAL CHARACTERISTICS CABLE ASSEMBLY Center contact retention Stripping a b c d e f Axial force Mating End NA N mini mm 3.5 0 0 0 0.85 0 Axial force Opposite end NA N mini Torque NA N.cm mini Assembly instruction: NA Recommended torque Mating NA N.cm Recommended cable(s) 250 Panel nut N.cm RG 402 Clamp nut NA N.cm A/F clamp nut 0.0000 mm Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the Mating life 100 Cycles mini assembly Weight 13.0500 g Cable retention - pull off 200 N mini - torque NA N.cm TOOLING Part Number Description Hexagon . OTHER CHARACTERISTICS IP68(1m,24h) mated condition This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.