R222M10730 Radiall

Technical Data Sheet STRAIGHT PRESS MOUNT MALE RECEPTACLE FRONT MOUNT - WITH CYLINDRICAL CONTACT PAGE 1/4 ISSUE 10-11-16B SERIES SMP-MAX PART NUMBER R222M10730 All dimensions are in mm . pn ao COMPONENTS MATERIALS PLATING ( m) Body BRASS NPGR Center contact BRASS NPGR Outer contact Insulator PTFE Gasket Others parts - - - - - - This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary. Technical Data Sheet STRAIGHT PRESS MOUNT MALE RECEPTACLE FRONT MOUNT - WITH CYLINDRICAL CONTACT PAGE 2/4 ISSUE 10-11-16B SERIES SMP-MAX PART NUMBER R222M10730 PACKAGING Standard Unit Other 100 Contact us Contact us ELECTRICAL CHARACTERISTICS Impedance 50 Frequency 0 - 10 GHz VSWR (max.) / Return Loss (max.) DC - 4 GHz 4 6 GHz ENVIRONMENTAL 1.07 / -30dB 1.12 / -25dB Insertion loss < 0.03* F(GHz) dB RF leakage - ( NA - F(GHz)) dB Maxi Operating temperature -55/+165 C Voltage rating 335 Veff Maxi Hermetic seal NA Atm.cm3/s Dielectric withstanding voltage 500 Veff mini Panel leakage NA Insulation resistance 5000 M mini MECHANICAL CHARACTERISTICS SPECIFICATION Center contact retention Axial force Mating End 7 N mini Axial force Opposite end 15 N mini OTHER CHARACTERISTICS Torque NA N.cm mini Pull-in-range 0.0000 mm Assembly instruction: Recommended torque Mating NA N.cm Panel nut NA N.cm Others: *Coaxial Transmission Line Only Mating life 100 Cycles mini Weight 2.1310 g This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.