R380300024 Radiall

Technical Data Sheet STANDARD 20DB SHORT GPS ANTENNA 3.3V PAGE 1/2 ISSUE 13-12-19C SERIES PART NUMBER R380300024 ANTENNA All dimensions are in mm. Tolerances according ISO 2768 m-H pn ao This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary. Technical Data Sheet STANDARD 20DB SHORT GPS ANTENNA 3.3V PAGE 2/2 ISSUE 13-12-19C SERIES PART NUMBER R380300024 ANTENNA ELECTRICAL CHARACTERISTICS Frequency : GPS L1 (1575.42) MHz Nominal Impedance : 50 VSWR : 2.5:1 Max 19 Gain : dBic min Polarization : RHCP Axial Ratio 3 dB typ Hemi-spherical Radiation Pattern: P1 dB compression : -12 dBm Noise Figure (LNA alone) : <1.7 dB Supply Voltage : 3.3 V typ. 3.1 V min 3.5 V max Current consumption : 8 mA typ 12 mA max Male SMA Connector type : MECHANICAL CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS Plastic radome : POLYCARBONATE -32/+55 C Operating temperature : BLACK IAW MIL-STD-810G Color : meth 501.5 & 502.5, proc II Texture : Charmille 27 to 30 -55/+85 C Storage temperature : IAW MIL-STD-810G Weight : 8.71 g meth 501.5 & 502.5, proc I Overall length : 33.5 mm 3 cycles -40/+70C Max Diameter 13 mm Temperature Shocks IAW MIL-STD-810G meth 503.5 , proc I Yes RoHS Compliant: 40,000 Altitude : ft IAW MIL-STD-810G meth 500.5, proc I Induced Hot Humid Humidity : IAW MIL-STD-810G meth 507.5, proc II 1m, for 2h Immersion (mated to radio) IAW MIL-STD-810G meth 512.5, proc I Salt Fog : 96h (4x24h alterning wet & dry) IAW MIL-STD-810G meth 509.5 Solar Radiation: 10 cycles, 20/4h sun/dark IAW MIL-STD-810G meth 505.5, proc II 26 drops from 1.2m high Transit Shocks : IAW MIL-STD-810G meth 516.6, proc IV Table 504.1-II Fluid Contamination MIL-STD-810G Meth 504.1, proc II This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.